Koubachi Plantsensor

Koubachi Plantsensor manual

  • Short
    For further information go to:
    Sensor Button
    Click for
    > 10 seconds
    Click for
    > 3 seconds
    Measure and
    transmit data
    If no Wi-Fi signal is
    available the sensor starts
    pulsating red
    System requirements
    •Internet connection through Wi-Fi (802.11 b/g)
    •Wi-Fi reception at the location of the plant
    •For conguration: A computer or an iOS device with Wi-Fi
    The following systems are supported for conguration
    •Microsoft: Windows XP, Windows Vista, Windows 7
    •Apple: Mac OS X 10.6.8 or later, iOS 4 or later
    •Linux: The Wi-Fi adapter must support ad-hoc.
    Perfect eciency with non specied systems cannot be guaranteed.
    Quick start guide
    This Quick start guide provides additional instructions
    for startup. Before starting, we recommend to read the
    instructions on http://www.koubachi.com/support
    The product fullls according to the conformity declaration
    the guidelines 2004/108/EU, ES 60950 and ES 301489-1.
    This device complies with part 15 of the FCC Rules. Operation
    is subject to the following two conditions:
    1) This device may not cause harmful interference, and 2)
    this device must accept any interference received, including
    interference that may cause undesired operation.
    Package content
    Wi-Fi Plant Sensor
    2x AA-Batteries
    Quick start guide
    Configuration over Wi-Fi
    To start the conguration make sure all mentioned system
    requirements are fullled.
    1) Go to http://go.koubachi.com and follow the instruc-
    2) Insert batteries.
    3) After completing the conguration, insert the sensor
    into the soil near your plant.
    How it works
    The Wi-Fi plant sensor measures soil moisture, light
    intensity, and the ambient temperature. Measurements are
    transmitted wirelessly to the Koubachi server for further
    processing. These are the measurement ranges and values:
    Care instructions
    The Koubachi Wi-Fi Plant Sensor is generally maintenance
    free. With little care, it will be the best companion for your
    plant care.
    Cleaning: the Sensor tip can be cleaned with a moist cloth,
    e.g. when you relocate the sensor to another plant. Do not
    use detergents or oil containing substances for cleaning.
    The sensor tip must only be cleaned with pure water.
    Battery replacement: Normally, the lifespan of the batteries is
    approximately 1.5 years. When you replace the batteries, take
    care that you close the battery compartment rmly, before
    tightening the battery screw. That way, the compartment
    remains watertight. Always use two fresh disposable batteries.
    Use high quality disposable AA batteries. We recommend
    Duracell PLUS or Panasonic Pro Power batteries.
    Measurement range of soil moisture :
    Resolution of soil moisture :
    Measurement range of light intensity :
    Resolution of light intensity :
    Measurement range of ambient temperature :
    Resolution of ambient temperature :
    1-6000 mBar
    5 mBar
    0-200 kLux
    5 Lux
    -20°–50° C / 0°–120° F
    1.8° C / 3,2° F
    ©2012 Koubachi AG. All rights reserved.
    The Koubachi logo is a registered trademark of Koubachi AG.
    Tested with the following systems
    Use of the Sensor Button
    When used according to the intended use, you have 24
    months warranty from the date of purchase on material and
    manufacturing defects. A detailed warranty description can
    be found on http://www.koubachi.com/warranty
    Safety instructions
    •Use the Koubachi Wi-Fi Plant Sensor only indoors.
    •Avoid plugging the Koubachi Wi-Fi Plant Sensor into hard
    ground, and if necessary loosen the soil with a spade.
    •Do not immerge the sensor in water.
    •Do not drop the sensor on hard surfaces, such as tables or
    concrete oors.
    •Use the product only according to its intended use and
    within the range of the denoted technical parameters. Do
    not use force.
    •Never use the device on or near conducting current com-
    •Only perform maintenance and repair work on this device as
    instructed in the operation manual. Adhere strictly to the de-
    scribed action steps. Use only original Koubachi spare parts.
    •Dispose used batteries according to legal regulations.
    •At the end of its lifespan, dispose the product according to
    the separated refusal collection regulations for electric and
    electronic devices (according to local regulations) or return
    the product to Koubachi.
Koubachi Plantsensor

Need help?

Number of questions: 0

Do you have a question about the Koubachi Plantsensor or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Koubachi Plantsensor owners to properly answer your question.

View the manual for the Koubachi Plantsensor here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: Engels. Do you have a question about the Koubachi Plantsensor or do you need help? Ask your question here