Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Troubleshooting
Korg 1212 I/O 51
English
the external clock source. This is because when audio is recorded into a
digital audio program, the audio files are stored with the program’s current
sample rate setting - even if the real sample rate is different, as in the
example above. This can result, for example, in a file containing 48kHz
data, but marked as 44.1kHz. Avoid this by always making sure that both
the digital audio software and the external source are set to the same
sample rate.
Note that sample rate conversion will not help to repair these files; this will
change the data to play back at the other sample rate, but will preserve the
incorrect speed and pitch. The way to repair these files is to do the
opposite: change the file’s sample rate parameter, while leaving the data
unchanged. Some programs, such as BIAS’s Peak and Digidesign’s Sound
Designer II, allow you to do this easily, by simply typing in a new sample
rate.
No sound from Analog inputs (MacOS)
In Deck, make sure that the Options menu’s Analog Input Level is set to 7.
No audio is recorded (MacOS)
In Deck, are the desired tracks record-enabled? Deck gives no indication
when the transport is in record, but no tracks selected.
Audio dropouts (Windows 95)
As the 1212 I/O transfers data into buffers on the PC, it periodically
interrupts the PC to let it know that a new block of recorded samples is
ready and that it has read a block of playback samples. If these interrupts
are held off for too long, the playback buffers will not be refilled with
playback samples, and the recorded samples will be overwritten before
they are read.
To track this down, determine the IRQ assignments of the 1212 I/O and
other PCI and SCSI devices, using the Device Manager (Control Panel-
>System-> Device Manager). Try giving the 1212 I/O a higher priority IRQ
than the other devices. IRQ priorities, from highest to lowest, are 0, 1, 2, 8 -
15, and finally 3 - 7.
Sometimes, changing IRQs can be accomplished by swapping PCI slots
with other devices. As an alternative, you can manually change
assignments using the Resources tab of the device to be changed under the
Device Manager. In general, swapping slots is preferred over manual IRQ
assignment.
1212 I/O word clock syncs to Word Clock input instead of S/PDIF input
The 1212 I/O’s Word Clock input has precedence over the S/PDIF input.
When the 1212 I/O’s clock source is set to S/PDIF•Word Clock, and a valid
word clock is received at the Word Clock input, it will be used instead of
the S/PDIF input.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results