Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Wave Devices (Windows 95)
Korg 1212 I/O 45
English
input sensitivity for the analog inputs; for adjusting audio input level from
ADAT or S/PDIF sources, we recommend that you use an external mixer.

Balance Slider

Each stereo output pair has a balance slider, which controls the relative
output levels of the left and right channels.
The balance control is active only when the device’s Vol/Bal On box is
checked. For more information, please see “Vol/Bal On,” below.

Vol/Bal On

The Vol/Bal On check-boxes allow you to enable or disable
volume/balance control for each wave device, as desired. To enable
volume/balance control for a particular device, check the Vol/Bal On box
below the device’s volume slider; to disable volume/balance control, un-
check the box.
You can check or un-check all of the boxes at once by using the Set All and
Clear All buttons at the right side of the page.
Volume and balance controls consume CPU resources, and so we
recommend that volume/balance control remain disabled except when
needed. For more information, see below.
When to use volume/balance control
Volume/balance control is provided so that the 1212 I/O may be used for
playing back system sounds, or used in conjunction with simple wave
applications without a volume control (such as the Windows 95 Media
Player). In these cases, the volume/balance controls will be helpful.
However, they do consume some of the real-time resources of the CPU.
When volume/balance control is enabled for a wave device, every sample
passed to the device gets scaled by the current volume and balance
settings.
If you are using the 1212 I/O with an application that already provides
volume control, or if you have an external means of adjusting the playback
volume, then you can get better performance from your PC by disabling
the wave device volume/balance controls.

Sync Settings

Through the standard Windows 95 driver, each of the 1212 I/O’s six input
and output pairs appears to the system as an independent wave device.
The digital audio program must start recording or playback on each of
them, one at a time, which (when the Sync Settings are not used) can cause
small offsets between the stereo pairs.
The Sync Settings solve this by creating a group of synchronized input and
output pairs. The 1212 I/O will not start either recording or playback until

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results