Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Applications
Korg 1212 I/O 37
English
several tracks have been selected on ADAT #2, making it into a transmitter.
Notice how this blocks the output of the 1212 I/O.
To avoid this situation, you need to clear the BRC’s digital I/O settings. To
do this:
1. Press the BRC’s EDIT button.
2. Press the BRC’s DIGITAL I/O button until you see the “Select
source with track buttons” page.
3. Make sure that no tracks are selected. If necessary, de-select any
currently selected tracks.
Even if no tracks are selected, it is possible that one of the machines is still
designated as a digital I/O transmitter–so continue on to the next step.
4. Press EDIT again to exit edit mode.
5. Press the DIGITAL I/O button twice, to toggle it off and then on
again.
This ensures that the digital I/O settings have been reset, so that all of the
ADATs are acting as digital audio receivers.
Digital I/O transmitters block incoming optical data

Using the 1212 I/O with multiple ADATs, without the BRC

When using two or more ADATs without the BRC, the 1212 I/O can only
share digital audio data with ADATs to which it is directly connected. This
is because, without the BRC, the ADATs do not pass data from their optical
input to their optical output. Instead, each ADAT’s optical output carries
only the audio tracks from its own tape. In this way, each ADAT receives
only the output of the previous machine in the loop.
1212 I/O Output:
ADAT #2 Output:
ADAT #1
ADAT #2
1212
I/O
ADAT #3
(transmitter)

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results