Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Applications
36 Korg 1212 I/O
English
note: ADAT timecode synchronization and clock source,” on page 20, for
more information.
When synchronizing to ADAT timecode, the 1212 I/O’s word clock source
cannot be set to Internal.
SMPTE and MTC offsets have no effect on ADAT timecode
Some ADAT devices, such as the Alesis BRC and Fostex RD-8, allow you to
enter SMPTE and/or MIDI Time Code (MTC) offsets from the normal
ADAT timecode. It is important to remember that these offsets do not affect
the basic ADAT timecode itself, as it is sent along the ADAT sync cables;
the offsets only affect synchronization through the device’s SMPTE or
MIDI inputs and outputs.
The 1212 I/O listens only to the simple, unadulterated timecode carried on
the ADAT sync cable. This means that entering a SMPTE offset on the BRC,
for instance, has no effect on the sync received by the 1212 I/O.

Using Premiere Plug-Ins with 1212 I/O-compatible software (MacOS)

Premiere Plug-Ins automatically use the Apple Sound Manager for
preview audio output. When the 1212 I/O is selected as the Sound
Manager output device, the previews will play back through the 1212 I/O.
Since Premiere Plug-Ins use the Sound Manager, they are totally unaffected
by the output assignments in software which directly supports the
1212 I/O (such as Deck II); instead, they use the output channels assigned
to the Sound Manager in the 1212 I/O Utility.
For more information on using the 1212 I/O with the Sound Manager,
please see the chapter “Sound Manager (MacOS),” beginning on page 39.

Using the Alesis BRC: 1212 I/O output to ADAT input

The BRC’s track routing features (under the BRC’s Digital I/O button)
control the digital I/O routing for the ADAT system. When copying tracks
between ADATs, the BRC is used to select one or more source tracks on a
single ADAT machine; this machine becomes the digital audio
“transmitter,” and the selected tracks are sent out on the optical bus. All the
other ADATs in the system become audio “receivers,” listening to the
output of the transmitter and passing it on to their own outputs.
When using the 1212 I/O as the digital I/O source, all of the ADATs need
to be receivers. If one of the ADATs is acting as a transmitter, then it will
block the output of the 1212 I/O to all subsequent ADATs in the optical
loop.
The diagram below shows the 1212 I/O connected to a three-ADAT
system, with the optical inputs and outputs of all the devices chained
together. Using the digital I/O routing feature of the BRC (not shown),

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results