Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Applications
Korg 1212 I/O 35
English
before the machine containing the source tracks. This is because the source
machine will block the output of the 1212 I/O, in favor of its own output.
For instance, let’s say that you have a three-ADAT system, with the
1212 I/O at the end of the ADAT chain. If the source tracks are on ADAT
#2, you can record the S/PDIF output onto ADAT #1, but not onto ADAT
#3. If the source tracks are on ADAT #3, you can record the S/PDIF output
onto either ADAT #1 or ADAT #2.

Bouncing ADAT tracks

You can use the 1212 I/O Utility to bounce audio from one ADAT track to
another–for instance, from tracks 1 and 2 to tracks 3 and 4.
1. In the 1212 I/O Utility, set the desired ADAT inputs to the desired
ADAT outputs.
2. Set the 1212 I/O’s Clock Source to ADAT.
3. Set the ADAT system’s word clock to Internal.
For more information, please see “Setting the word clock source on an
ADAT system” on page 19.
If you are using the Alesis BRC, read the instructions under “Using the
Alesis BRC: 1212 I/O output to ADAT input,” on page 36.

Synchronizing to ADAT timecode

The 1212 I/O provides rock-steady, drift-free ADAT audio and timecode
synchronization. When used with compatible digital audio software, this
creates a non-linear editing system directly integrated into your ADAT
system–which can also operate as an additional, ADAT-compatible
multitrack.
To set up your digital audio software for ADAT timecode synchronization:
1. Select the 1212 I/O as the audio input and output hardware, as well
as the timecode source.
See your digital audio software’s manual for more information.
2. In the digital audio program, set the 1212 I/O’s word clock source to
ADAT.
For more information, please see “Setting the word clock source in digital
audio software” on page 16 for more information.
3. Set the ADAT system’s word clock to Internal.
For more information, please see “Setting the word clock source on an
ADAT system” on page 19.
When using a BRC and/or ADAT XTs, you may also set the ADAT word
clock to Digital, and the 1212 I/O to S/PDIF•Word Clock. See “Special

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results