Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Applications
34 Korg 1212 I/O
English
Setting the Sample Rate parameter lets the S/PDIF device know what rate
to expect.
3. Set the Clock Source to ADAT.
4. Set the ADAT system’s word clock to Internal.
For more information, please see “Setting the word clock source in digital
audio software” on page 16.
If you are using the Alesis BRC, read the instructions under “Using the
Alesis BRC: 1212 I/O output to ADAT input,” on page 36.
Unlike the S/PDIF-to-ADAT routing described above, the S/PDIF device
derives word clock sync automatically from the input signal.
5. If you are using the Alesis BRC, press the BRC’s Digital I/O button
until you see the “Select source with track buttons” page, and then
select the same tracks as you did in step 1.

Processing ADAT audio through a S/PDIF device

The 1212 I/O allows you to send audio data from the ADAT inputs
through a S/PDIF signal processor–such as an effects processor, digital EQ,
etc.–and then back to the ADAT outputs.
To route ADAT audio through a S/PDIF device;
1. Set the desired ADAT inputs to the S/PDIF L and S/PDIF R outputs.
2. Set inputs S/PDIF L and S/PDIF R to the desired ADAT output
channels.
3. Set the Sample Rate to the same rate as the ADAT system.
As described under ADAT-S/PDIF routing, above, setting the Sample Rate
parameter lets the S/PDIF device know what rate to expect.
4. Set the Clock Source to ADAT.
5. Set the ADAT system’s word clock to Internal.
For more information, please see “Setting the word clock source in digital
audio software” on page 16.
If you are using the Alesis BRC, read the instructions under “Using the
Alesis BRC: 1212 I/O output to ADAT input,” on page 36.
Again, the S/PDIF device derives word clock sync automatically.
6. If you are using the Alesis BRC, press the BRC’s DIGITAL I/O
button until you see the “Select source with track buttons” page,
and then select the same tracks as you did in step 1.
Using a S/PDIF processor with multiple ADATs and the Alesis BRC
To record the output of the S/PDIF processor onto another ADAT machine,
the recording machine should be in the digital loop after the 1212 I/O, and

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results