Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Applications
Korg 1212 I/O 33
English
For this reason, when using the 1212 I/O with some Sound Manager
programs, you may want to mute the Auto-Routing Mode by pressing the
Mute All button in the 1212 I/O Utility.
Whenever you edit the current settings in the 1212 I/O Utility, the 1212 I/O
remembers these settings, and continues to use them for the Auto-Routing
Mode as long as the computer is on. On the next startup, it will again be
restored to the settings in the Preferences file (in the MacOS) or the System
Registry (in Windows 95).

Routing from S/PDIF In to ADAT Out

You can use the 1212 I/O Utility to transfer digital audio from a S/PDIF
device, such as a DAT machine, synth, sampler, or external A/D converter,
to an ADAT-compatible multitrack recorder.
1. Set inputs S/PDIF L and S/PDIF R to the desired ADAT output
channels.
2. Set the Clock Source to “S/PDIF•ClockIn.”
3. Set the ADAT system to sync to the external word clock.
For more information, please see “Setting the word clock source in digital
audio software” on page 16.
If you are using the Alesis BRC, read the instructions under “Using the
Alesis BRC: 1212 I/O output to ADAT input,” on page 36.
This procedure makes the ADAT system sync to the word clock of the
S/PDIF source, as translated into ADAT optical output through the
1212 I/O. If the ADAT system is not set to sync to an external word clock, it
will not interpret the incoming audio data correctly, and you’ll hear
clicking or other nasty audio artifacts.
4. If you are using the Alesis BRC, connect the Word Clock output of
the 1212 I/O to the 48kHz In of the BRC, and then follow the
instructions under “Using the Alesis BRC: 1212 I/O output to ADAT
input,” on page 36.
When the BRC is connected, it supplies the word clock to the ADAT
system. Without the BRC, the clock is derived from the ADAT optical I/O,
and so an explicit word clock connection is unnecessary.

Routing from ADAT In to S/PDIF Out

Routing from ADAT in to S/PDIF out is slightly different from the other
way around.
1. Set the desired ADAT inputs to the S/PDIF L and S/PDIF R outputs.
2. Set the 1212 I/O’s Sample Rate to match that of the ADAT system.
Since original ADATs used the pitch control to choose between 48kHz and
44.1kHz, the 1212 I/O cannot be sure of the sample rate of ADAT input.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results