Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Applications
32 Korg 1212 I/O
English

Applications

This section provides brief, step-by-step instructions for the major
functions of the 1212 I/O. Many of these can be performed using the
simple 1212 I/O Utility program. Digital audio software written for use
with the 1212 I/O should allow you to access to all of the parameters
provided in the Utility program, so these tricks should work in those
programs as well.
All of the following instructions assume that you’ve followed this single,
very important step:
1. Enable Digital In on the ADAT system, and enable digital I/O for
any connected S/PDIF devices. If you are using an Alesis BRC, set
the digital I/O source and destination to ADAT.
This is necessary for almost any operation using the 1212 I/O.

Auto-Routing Mode

The 1212 I/O Utility can be used for routing audio directly from the card’s
inputs to the card’s outputs. For instance, you can route ADAT channels
through the card for doing dubs between ADATs, you can route ADAT
inputs to S/PDIF outputs (or vice versa), and so on.
Even when the 1212 I/O Utility isn’t active, however, the 1212 I/O will
route audio from input to output whenever it is not otherwise in use; this is
called the Auto-Routing Mode. On startup, the 1212 I/O will load a setup
from the 1212 I/O Preferences file. By default, this routes each input to the
same output, with internal clock source, 48kHz sample rate, and analog
input trims all the way up.
You can change these preferences by using the 1212 I/O Utility’s “Save As
Defaults...” command, as described on page 29.
When the 1212 I/O is being used by a 1212 I/O-compatible digital audio
application (such as Deck II or Cubase VST), the Auto-Routing Mode will
be disabled. 1212 I/O-compatible applications can use the routing for their
own purposes, including record monitoring.
When you quit the application, the Auto-Routing Mode will be restored.
On MacOS computers, with some Sound Manager applications, the
enabling and disabling of the Auto-Routing Mode works slightly
differently. These Sound Manager applications use the card only when
actually playing a sound; when the sound stops, the Sound Manager will
“quit” the 1212 I/O. At this point, the 1212 I/O will go into Auto-Routing
Mode.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results