Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
1212 I/O Utility
28 Korg 1212 I/O
English

Mute All

Pressing this button mutes all the inputs, so that all inputs receive only the
purest, cleanest, most eminently silent digital black. Pressing the button
again restores the previous settings of the window.

Through All

Pressing this button sends all inputs to their corresponding outputs, so that
ADAT 1 in goes to ADAT 1 out, ADAT 2 in to ADAT 2 out, and so on. All
volumes are set to full, and all phases are set to normal. Pressing the button
again restores the previous settings of the window.

File Menu

You can save the settings in the 1212 I/O Utility’s window as a document
on disk. Use this to store frequently used configurations of channel routing
and mixer settings.
New
This command creates a new, untitled 1212 I/O configuration, with all
parameters set to their default settings.
Open
This command brings up the standard Open dialog, allowing you to load a
previously saved 1212 I/O setup from disk.
If a document is currently open, selecting the Open command will
automatically close the document. If the document has been edited, you
will be prompted to save your edits before the document is closed.
Opening a document sets all the parameters in the 1212 I/O to match the
settings in the document, so that what you see on the screen always
matches what’s going on in the card itself.
If you have multiple 1212 I/O cards installed in your computer, the
parameters for all of the cards are stored in a single file. If the file that you
are opening has parameters for a different number of cards than are
currently installed, a warning message will appear, and the file will load as
best as it can.
This works slightly differently under the MacOS and Windows 95.
On the MacOS, if the file contains parameters for three cards, but only two
are currently installed, then the parameters for the file’s third card will be
ignored. If the file contains parameters for two cards, but three are
currently installed, the parameters for the third card will be set to default
values.
Under Windows 95, the parameters in a multi-card file are always restored
to the same PCI bus/device location. If no 1212 I/O card is in the stored
location, then the settings for that card are ignored. If a card is in a location

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results