Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
1212 I/O Utility
26 Korg 1212 I/O
English
maximum value of 0dB, the volume of the input signal will be unchanged.
At lower values, the volume will be reduced. At the minimum value of
OFF, the input signal will be completely muted.
In general, it’s best to leave the input pad set to 0dB, and attenuate only
when necessary to avoid digital clipping. If you’re using an external mixer,
you may find it more convenient to reduce the output level of the mixer.
Also, if you find yourself routinely attenuating by around -12dB, this may
mean that the 1212 I/O is configured for -10 levels, while the rest of your
system is operating at +4. For more details on setting the 1212 I/O’s analog
levels, please see “Analog levels: +4 or -10” on page 3.
Right
0dB to -78dB, OFF.
This allows you to attenuate the analog input
sensitivity of the right channel, prior to the A/D conversion. It works just
the same as the control for the left channel, as described above.

Sound Manager Routing (MacOS)

The Apple Sound Manager offers two audio inputs and two audio outputs,
each of which can be routed to (or from) any of the 1212 I/O’s twelve input
channels and outputs, respectively. For more information on setting up and
using the Sound Manager, please see the section titled “Sound Manager
(MacOS),” starting on page 39.
If the 1212 I/O is not selected for use with Sound Manager (as described
under “Sound Manager (MacOS),” starting on page 39), the Sound
Manager Routing parameters will be inactive and grayed out. If the 1212
I/O is selected for input only, then the output parameters will be grayed
out; if it is selected for output only, then the input parameters will be
grayed out.
If you have multiple 1212 I/O cards installed in your computer, select the
same card for Sound Manager input and output. If the current card (as set
in the 1212 I/O In PCI Slot parameter) is not assigned for use with the
Sound Manager, the input and output parameters will be grayed out, as
described above.
Input L
Analog L, Analog R, S/PDIF L, S/PDIF R, ADAT 1-8.
This selects the
1212 I/O input channel which will be routed to the Sound Manager’s left
input channel.
Input R
Analog L, Analog R, S/PDIF L, S/PDIF R, ADAT 1-8.
This selects the
1212 I/O input channel which will be routed to the Sound Manager’s right
input channel.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results