Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
1212 I/O Utility
Korg 1212 I/O 25
English

Word Clock & Sample Rate

Clock Source
When connecting multiple digital audio devices–such as the 1212 I/O, an
ADAT system, and a S/PDIF device–it is important that the word clocks of
the devices be locked together. If the clocks are not locked, the audio may
be marred by pops and clicks. The 1212 I/O can lock to incoming clocks
from any of its digital inputs, or it can generate its own clock. For more
information, see “A few words on word clock,” on page 20.
You will need to select different clock sources from time to time, depending
on what you are currently doing with the 1212 I/O; see the section
“Applications,” on page 32, for details.
ADAT.
The ADAT optical input will provide the master word clock.
S/PDIF•ClockIn.
This is a dual-purpose setting, which depends on
whether or not a device is connected to the Word Clock input.
If an external clock source is connected to the Word Clock input, and is
generating a word clock signal, then it will be used as the master word
clock source.
Otherwise, the S/PDIF input will provide the master clock.
Internal.
The 1212 I/O’s internal clock will be the master. With this setting,
the Sample Rate parameter, below, controls the clock.
Sample Rate
This parameter has two functions. First, it sets the clock rate when the
Clock Source parameter, described above, is set to Internal. Second, it sets
the sample rate information embedded in the S/PDIF output data, which
in turn sets the sample rate of any connected S/PDIF devices.
When transferring audio from the ADAT inputs to S/PDIF output, it is
important to set this parameter so that it matches the sample rate of the
ADAT. Since original ADATs used their pitch controls to choose between
48kHz and 44.1kHz, the 1212 I/O cannot be sure of the sample rate of
ADAT input. Setting the Sample Rate parameter lets the S/PDIF device
know what rate to expect. If this parameter is set incorrectly, the connected
S/PDIF device may not function properly.
44.1 kHz.
The internal sample rate and S/PDIF output will be set to
44.1 kHz.
48 kHz.
The internal sample rate and S/PDIF output will be set to 48 kHz.

Analog Input Trim

Left
0dB to -78dB, OFF.
This allows you to attenuate the analog input
sensitivity of the left channel, prior to the A/D conversion. At the

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results