Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
System Configurations
20 Korg 1212 I/O
English
NOTE: The original ADAT defaults to “dig” at power-on.
BRC (with either original ADAT or ADAT XT)
When using the BRC with either original ADATs or ADAT XTs, the BRC
supplies the word clock to the ADAT system. The BRC can use its internal
word clock, or word clock from its 48kHz input. This is controlled by the
Clock Source parameter, under the EXT SYNC button. Once the Clock
Source has been set, you can enable or disable external sync by pressing the
EXT SYNC button, and the button’s light will toggle on and off accordingly.
To set the BRC to use its internal clock, simply make sure that the EXT
SYNC button’s light is off. (EXT SYNC also controls SMPTE
synchronization; if you need to use this feature, make sure that the Clock
Source is set to Internal.)
To set the BRC to use a word clock from the 1212 I/O, set the Clock Source
to 48kHz Input, and then turn on EXT SYNC. Connect the word clock
output of the 1212 I/O to the 48kHz Input on the back of the BRC.
Special note: ADAT timecode synchronization and clock source
When using ADAT timecode sync with the original ADAT (without BRC),
the ADAT must be the master clock source (1212 I/O set to ADAT, and
ADAT set to Internal). The 1212 I/O clock source cannot be set to either
S/PDIF•Word Clock or Internal.
With using ADAT timecode sync with the ADAT XT, the 1212 I/O’s clock
source may be set to either ADAT or S/PDIF•Word Clock. If the 1212 I/O’s
clock source is set to ADAT, set the ADAT to Internal; if the 1212 I/O is set
to S/PDIF•Word Clock, set the ADAT to Digital.
When using ADAT timecode sync with a BRC-controlled ADAT system
(with either original ADATs or ADAT XTs), it is the same as with the ADAT
XT: the 1212 I/O’s clock source may be set to either ADAT or
S/PDIF•Word Clock. See the notes under “BRC (with either original ADAT
or ADAT XT),” above.
These restrictions apply only to digital audio recording using ADAT
timecode.
Recording and playback without ADAT timecode work well with all
1212 I/O clock settings.

A few words on word clock

Whenever two or more audio devices are connected together digitally, they
are sending and receiving thousands of individual bits of data every
second.The bits are sent out continuously, one after another, at a very
steady pace. This is similar to two jugglers passing balls between each
other, while at the same time keeping up their own steady juggling
patterns.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results