Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
System Configurations
Korg 1212 I/O 17
English
Make sure that the program’s sample rate matches the external clock
source
When you record or play back audio data using external clock sources
(such as the S/PDIF, ADAT, or Word Clock inputs), the sample rate is
controlled entirely by the external source, and not by the digital audio
program’s sample rate parameter. Because of this, you must make sure that
the external clock source is actually set to the same sample rate as the
digital audio program. If the two are different, it can result in audio playing
back faster or slower than expected.
For more information, see “Audio playback is slightly slow, or slightly
fast,” on page 50.

Connecting the 1212 I/O to an ADAT system

The 1212 I/O will work equally well in a system with only one ADAT, or in
a more complex system with multiple ADATs and a remote controller, such
as the Alesis BRC. When the 1212 I/O is used in a system with multiple
ADATs, it should always be connected to the last ADAT in the chain.
In this manual, by the way, we’ll use the term ADAT to refer to any ADAT-
compatible multitrack recorder, such as the Alesis ADAT and ADAT XT, the
Fostex RD-8 and CX-8, and the Panasonic MDA-1.
To connect the 1212 I/O to an ADAT system:
1. Connect the ADATs together as usual, with the sync and optical
outputs from ADAT #1 going into ADAT #2, from ADAT #2 to
ADAT #3, and so on.
2. Connect the ADAT Timecode Conditioner to the 1212 I/O’s ADAT
sync input.
3. Connect the sync output from the last ADAT to the 1212 I/O’s ADAT
Timecode Conditioner.
4. Connect the optical outputs from the last ADAT to the optical inputs
of the 1212 I/O.
5. Connect the optical output of the 1212 I/O to the optical input of
ADAT #1.
6. If using an Alesis BRC, connect the BRC’s sync output to ADAT #1’s
sync input, and then connect the Word Clock output of the 1212 I/O
to the 48kHz Input of the BRC.
This connection is necessary when recording from the 1212 I/O’s S/PDIF
input.
7. For general use, set the 1212 I/O’s word clock source to ADAT, and
the ADAT system’s word clock source to Internal.
For more information, see “Setting the word clock source on an ADAT
system,” on page 19.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results