Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
System Configurations
Korg 1212 I/O 15
English
1. Connect the 1212 I/O’s optical cables to the 168RC’s Dig A ports.
2. On the 168RC, press the MISC button, and scroll down until you
reach the CLK Source parameter. Set this to DIG-IN-A (the
1212 I/O).
This selects the 1212 I/O as the word clock source for the 168RC.
3. In the digital audio program, set the 1212 I/O’s word clock source to
Internal.

Korg 168RC and ADAT

This setup combines the 1212 I/O and an ADAT with the Korg SoundLink
DRS 168RC digital mixer. The ADAT provides the word clock source; the
168RC slaves to the ADAT, and the 1212 I/O slaves to the 168RC.
1. Connect the ADAT’s optical cables to the 168RC’s Dig A ports, and
the 1212 I/O’s optical cables to the 168RC’s Dig B ports.
2. On the 168RC, press the MISC button, and scroll down until you
reach the CLK Source parameter. Set this to DIG-IN-A (the ADAT).
This selects the ADAT as the word clock source for the 168RC.
3. Connect the ADAT Timecode Conditioner to the 1212 I/O’s ADAT
sync input.
4. Connect the sync output from the ADAT to the 1212 I/O’s ADAT
Timecode Conditioner.
5. In the digital audio program, set the 1212 I/O’s word clock source to
ADAT.
6. Set the ADAT’s word clock source to Internal.
For more information, see “Setting the word clock source on an ADAT
system,” on page 19.
7. If using an Alesis BRC, connect the BRC’s sync output to the
ADAT’s sync input, and then connect the Word Clock output of the
1212 I/O to the 48kHz Input of the BRC.
This connection is necessary when recording from the 1212 I/O’s S/PDIF
input.

Yamaha 02R

The 1212 I/O and the Yamaha 02R digital mixer can be connected in many
different ways, depending on the rest of your studio setup. Either the
1212 I/O or the 02R can be the word clock master, each using either the
ADAT optical cables or a dedicated word clock cable.
Whatever configuration you decide upon, you’ll need to set all the word
clocks accordingly. One possible setup is to sync the 02R to the 1212 I/O,
using the 1212 I/O’s ADAT output. In this case:

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results