Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
System Configurations
Korg 1212 I/O 13
English
In Deck, set the Sync Mode to Digital. For more information on word clock
settings in audio software, please see “Setting the word clock source in
digital audio software,” on page 16.
3. When playing back into the S/PDIF device from a digital audio
program, set the 1212 I/O’s word clock source to Internal (or ADAT,
if you generally use an ADAT system as the master clock source).
Devices which accept external word clock
Some S/PDIF devices, on the other hand, may allow you to freely select
between internal and external word clock. Some may use a dedicated word
clock input; others may use the clock signal received at their S/PDIF input.
When using the 1212 I/O with these devices, you don’t need to change
word clock settings between recording and playback. Instead:
1. Connect the digital audio cables between the S/PDIF input and
output of the 1212 I/O and the S/PDIF device.
2. If the S/PDIF device has a dedicated word clock input, connect the
word clock output of the 1212 I/O to the word clock input of the
S/PDIF device.
3. Set the S/PDIF device to use the external clock source.
4. In the digital audio program, set the 1212 I/O’s word clock source to
Internal or ADAT, as desired.
You can also use a dedicated word clock source as the master for the
1212 I/O. In this case, connect the word clock output of the master device
to the word clock input of the 1212 I/O, and set the 1212 I/O’s word clock
source to S/PDIF•Word Clock.

Korg 880D/A

The 880D/A provides the 1212 I/O with an additional 8 high-quality
analog outputs. The 880D/A connects directly to the 1212 I/O’s ADAT
optical output, so setup is very simple.
1. Connect the optical output of the 1212 I/O to the optical input of the
880A/D.
You don’t need to make any word clock settings on the 880D/A; it will
automatically slave to its ADAT optical input.
2. In the digital audio program, set the 1212 I/O’s word clock source as
desired.
If you are using the 1212 I/O and 880D/A as a stand-alone system, set the
word clock source to Internal. If you are using the 1212 I/O in combination
with other digital audio devices, see this manual’s instructions for those
devices.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results