Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
System Configurations
12 Korg 1212 I/O
English

System Configurations

This chapter is intended to provide a quick guide for integrating the
1212 I/O into a variety of different setups. By its nature, the instructions
here are brief; for additional detail, please consult the manuals of the other
digital audio hardware and software being used.

Word clock settings

The great majority of technical support questions regarding the 1212 I/O
are the result of incorrect word clock settings. Incorrect word clock settings
may cause subtle degradation of audio, louder pops and clicks, altered
playback speeds, and/or timecode problems.
Keeping track of the word clock source may seem confusing at first, but it’s
really pretty simple. Just remember that, as with SMPTE synchronization
setups, there must be one and only one word clock master, with all other
devices set to slave to the master device. This means that you need to keep
track of the word clock settings on all of your digital audio devices–not just
on the 1212 I/O.

Using only the 1212 I/O’s analog input and output

The 1212 I/O can be used as a stand-alone analog I/O card, without any
digital connections. In this case, set the 1212 I/O’s word clock source to
Internal.

S/PDIF devices (DAT, effects, etc.)

There are two broad classifications of S/PDIF devices: those which can use
an external clock to control their digital output, and those which cannot.
These two types require different settings on the 1212 I/O.
Devices which do not accept external word clock
Many S/PDIF devices don’t have a separate setting for the word clock
source. For instance, many DAT machines automatically use incoming
digital audio data as the word clock source when recording, and
automatically use the internal clock source when playing back. Some
stand-alone A/D converters also may not accept an external word clock.
When recording from such devices, all the other devices must slave to the
S/PDIF device’s clock.
1. Connect the digital audio cables between the S/PDIF input and
output of the 1212 I/O and the S/PDIF device.
2. When recording from the S/PDIF device into a digital audio
program, set the 1212 I/O’s word clock source to S/PDIF•Word
Clock.

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results