Korg SoundLink DRS 1212 I/O manual

Korg SoundLink DRS 1212 I/O
7.5 · 1
PDF manual
 · 58 pages
English
manualKorg SoundLink DRS 1212 I/O
Installation
Korg 1212 I/O 11
English
“Clock Source,” on page 25). Connect this to the word clock input of the
slave device.
Most commonly, this will be connected to the Word Clock input of an
Alesis BRC; this is necessary when transferring audio from S/PDIF input
to ADAT output in a BRC-equipped system.
As with the Word Clock input, above, the Word Clock output requires a
shielded, video-quality cable, with 75-ohm or greater impedance.
ADAT Timecode Conditioner
The 1212 I/O’s ADAT Timecode Conditioner is a small device which fits
between the ADAT 9-pin sync cable and the 1212 I/O’s ADAT timecode
connector. This device pre-conditions the ADAT timecode, enhancing the
1212 I/O’s timecode sync capabilities.
If you will be using ADAT timecode with the 1212 I/O, please make sure
that the ADAT Timecode Conditioner is connected between the ADAT sync
cable and the ADAT sync connector on the 1212 I/O’s ADAT sync input.
Adat Timecode Conditioner
ADAT Timecode
Conditioner 1212 I/O Breakout CableADAT Sync Cable

Manual

View the manual for the Korg SoundLink DRS 1212 I/O here, for free. This manual comes under the category hi-fi systems and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Korg SoundLink DRS 1212 I/O or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Davide VecchiOctober 25, 2020

E' compatibile con macOS 10.14.6

Korg SoundLink DRS 1212 I/O specifications

Below you will find the product specifications and the manual specifications of the Korg SoundLink DRS 1212 I/O.

General
BrandKorg
ModelSoundLink DRS 1212 I/O
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg SoundLink DRS 1212 I/O below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Is the manual of the Korg SoundLink DRS 1212 I/O available in English?

Yes, the manual of the Korg SoundLink DRS 1212 I/O is available in English .

Is your question not listed? Ask your question here

No results