Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
8

2. Playing the AX100G

Phrase Trainer mode

In this mode, you can record a phrase from an audio device (CD
or MD) connected to the AUX IN jack, and play it back repeat-
edly as a loop. Then you can practice a phrase on your guitar
while playing to the repeating phrase.
Since you can slow down the playback speed without affecting
the pitch, this is a convenient way to learn or practice phrases
from recordings that are difficult to play.
In Phrase Trainer mode, the expression pedal will automatically
function as the volume control of your guitar.
When you enter this mode, the Modulation, Pedal, and Ambi-
ence effects will automatically be turned off. (When you exit
Phrase Trainer mode, the previous settings will be restored.)

Playback speed (%)

Operation

indicator

Phrase

Trainer icon

Playback/

Recording time

Playback/Stop

Hold

Phrase

Trainer mode

Select playback speed

Select recording mode

1. Enter Phrase Trainer mode
Press the PHRASE TRAINER switch located at the right of
the panel. (The corresponding LED will light.)
The Phrase Trainer icon will blink in the multi-display, and
the selected recording mode will be displayed.
You cannot edit the sound of the guitar in Phrase Trainer mode.
You must select the desired sound before entering this mode.
2. Select the recording mode
Rotate value knob 1 to select the recording mode.
AUX IN: Record up to 8 seconds of the AUX sound
GTR IN: Record up to 8 seconds of the guitar sound
3. Begin recording
Start the connected device, and at the moment that you wish
to begin recording, press the PROG/FX SELECT switch (REC)
to begin recording. The multi-display will indicate "REC" and
the number of seconds of recording, and the pedal indicator
will show the recording time.
Once you record a phrase, it is not possible to change the re-
cording mode. If you wish to change the recording mode, you
must return to Program mode, and once again enter Phrase
Trainer mode.
4. Stop recording
At the point that you want to stop recording, press the PROG/
FX SELECT switch (REC). Recording will end when the maxi-
mum recording time (8 seconds) has elapsed. The multi-dis-
play will indicate "PLAY," and loop (repeated) playback will
begin automatically.
Depending on the volume of the connected audio device, the
sound may be distorted. If this occurs, adjust the volume on
the audio device.
To re-do the recording
Press the DOWN switch (
) to stop playback. Then con-
tinue with step “3. Begin recording” and step “4. Stop record-
ing.”
To erase the recorded phrase
Press the EXIT switch to delete the phrase. You can now record
a new phrase to overwrite the previously-recorded phrase.
5. Stop/Playback
When you press the DOWN switch (
), playback will
stop. Press the DOWN switch ( ) once again, and play-
back will resume from where you stopped.
While the sound is being held, you can press the UP and
DOWN switches simultaneously, to return to the begin-
ning of the recorded phrase.
During playback, you can press the UP and DOWN
switches simultaneously to rewind.
During playback, you can press the UP switch (HOLD) to
hold the sound at that moment. Press the switch once again
to defeat this.
Changing the playback speed
You can slow down the playback speed without changing the
pitch of the recorded phrase.
Rotate value knob 2 to slow down the playback in 5% steps:
100%, 95%, 90%, 85%, ... 25%.
Exiting Phrase Trainer mode
To return to Program mode, you can press the PHRASE
TRAINER switch or EXIT switch.
When you exit Phrase Trainer mode or turn off the power, the
recorded phrase will be erased.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results