Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
7

2. Playing the AX100G

Rhythm

Press the RHYTHM switch (the LED will light) and the rhythm
will begin playing. Use value knob 1 to select the rhythm pattern
(50 types), use value knob 2 to adjust the tempo (range: 40—208),
and use value knob 3 to adjust the rhythm level (range: 0—30).
To stop the rhythm, press the RHYTHM switch while the rhythm
is playing.
The rhythm will stop when you enter Bypass, Mute, or Edit
modes.

AUX IN

Sound from an audio device (e.g. CD or MD) connected to the
AUX IN jack can be mixed with the effect sound for listening,
which is a convenient way to practice along with a song.
The AUX input and the effect output will automatically be mixed
and output from the OUT PUT jack except when you are in
Phrase Trainer mode.
Use the controls on your audio device to adjust the AUX IN
volume.

Expression pedal

You can use the expression pedal to control 23 types of Pedal
effect in realtime.
If a program uses a Pedal effect, the pedal indicator LED’s will
light to indicate the Min-Max value of the effect when you press
up and down on the pedal. Operation for the SAMPLE1
LOOP2 pedal effects is different from the other effects (see p.14).

Using the expression pedal as you play

1. In Program mode, select a program that uses the expression
pedal.
2. Make sure that the pedal indicator is lit. If it is not lit, advance
the expression pedal once as far as it will go, making the top
pedal indicator light (the pedal will be on)
3. Operate the expression pedal while playing your guitar. As
you raise and lower the pedal, the output sound will change
correspondingly.
If VOLUME is selected in the Pedal effect, it will not be possible
to turn the expression pedal on/off. The pedal indicator will re-
main lit.
The on/off status of the expression pedal is not memorized by
each program.
Do not apply excessive force to the expression pedal. Before oper-
ating the expression pedal, verify the amount of force that is re-
quired to make the pedal indicator light and to apply the effect.

Effect Select mode

In this mode, you can press the DOWN switch to switch the drive
channel while you perform. You can press the UP switch to turn
the Modulation and Ambience effects on/off.
As in Program mode, you can edit the settings, use the metro-
nome, and write a program.
In this mode it is not possible to switch programs or to select
bypass or mute.
Press the Effect Select
key to switch modes
Press and hold until
the number LED blinks
Program mode
Effect
Select mode
Turn the
MOD/AMB
effects on/off
Bank down
Bank up
Program
down
Program
up
Switch the
drive channel

Entering Effect Select mode

In Program mode, press the PROG/FX SELECT switch to enter
Effect Select mode. The multi-display will indicate "FX SEL,"
and the number LED will indicate "
."

Switching the drive amp channel

Since each program contains two separate Drive Amp effect set-
tings, you can switch between backing and solo sounds without
changing programs.
Each time you press the DOWN switch, the Drive Amp effect
settings will switch between channels A and B. When channel A
is selected the LED beside the DRIVE·AMP switch will light
green, and when channel B is selected the LED will light red.

Turning the Modulation and Ambience effects on/off

(INDIVIDUAL)

Each time you press the UP switch, the Modulation effect or
Ambience effect will be turned on/off.
The effects that are turned on/off when you press the UP switch
can be specified beforehand in the settings of the program, as
follows.

Procedure

1. Press the NR LEV switch.
2. Rotate value knob 3 to change the indication in the multi-dis-
play to the desired setting.
MOD: Only the Modulation effect will be turned on/off
AMB: Only the Ambience effect will be turned on/off
M+A: Both the modulation and ambience effects will be
turned on/off
For some effects, it is not possible for the Modulation and Pedal
effects or the Pedal and Ambience effects to be used simulta-
neously. For such combinations, attempting to turn on both ef-
fects will cause the previously-on effect to be turned off auto-
matically.

Exiting Effect Select mode

To return to Program mode, press either the PROG/FX

SELECT switch or the EXIT switch.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results