Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
63
4.資料
5. 最大時間まで録音するかダルを再度強く踏み込むと録音が
終わります。録音が終了すると、ペダルインジケーターが消灯
し、音した音がループ再生されます。
録音をやり直すときは、「3.ペダルインジケータが...」からく
り返してください。
6. エクスプレッション・ペ ルを操作します。

AMB(アンビエンス・エ フ ェクト)

ツマミ1 ツマミ2 ツマミ3 ツマミ4 ツマミ5
TYPE TIME TONE FEEDBACK MIX
DELAY 10[ms]〜2[SEC] 0〜10.0 0〜10.0 0〜10.0
ROOM1 −−−0〜10.0
ROOM2 −−−0〜10.0
GARAGE1 −−−0〜10.0
GARAGE2 −−−0〜10.0
HALL −−−0〜10.0
ARENA −−−0〜10.0
ディレイ、リバーブ等の残響系エフェクトモデルです。各ツマミ
に割り振られたパラメータは下記の通りです。
ツマミ1 TYPE エフェクトの選択
ツマミ2 TIME 音の遅れ時間の調整
ツマミ3 TONE 音質の調整
ツマミ4 FEEDBACK音の繰り返し量の調整
ツマミ5 MIX エフェクトのミックス量を調整
DELAY(ディレイ)
左右で時間差を持ったステレオディレイが、広がりを与えます。
TAPスイッチを2回押すと、のテンポでツマミ2のTIMEを変
えることができます。
ROOM1(ルーム1)
厚みのあるルームタイプのリバーブ。
ROOM2(ルーム2)
明るめのルームイプのリバーブ。
GARAGE1(ガレージ1)
ガレージイプのリバーブ1
GARAGE2(ガレージ2)
ガレージイプのリバーブ2
HALL(ホール)
ホール・タ プのリバーブ
ARENA(アリーナ)
アリーナイプのリバー
GARAGE(ガレージ)
ガレージ程度の中規模の部屋の残響を再現します。ペダルで残響
レベルをコントロールします。
HALL(ホール)
中規模ホールから大規模なホールの残響を再現します。ペダルで
残響レベルをコントロールします。

サンプル&プレイ機能

SAMPLE1からLOOP2は自分で弾いたフレーズを録音し、ペダ
ル操作により再生するエフェクトです。

ギターをある一定レベル以上の音量で弾かないと、録音は

開始されません。

録音したフレーズは、エフェクトのタイプやプログラムを

きりかえたり、レーズトレーナを使用したとき、電源オフ

などにより消去されます。

SAMPLE1(サンプル1)
ペダルを踏んだときに、音したフレーズが再生されます。
SAMPLE2(サンプル2)
ペダルを踏んだときに、録音したフレーズが再生、したときに
逆再生されます。
サンプル1、2の操作方法
1. ペダル・エ クトにSAMPLE1または、SAMPLE2を選ぶ
か、のエフェクトが使われているプログラムを選びます。
2. バリューツマミ3で録音時間Sは高音質3秒、Lは長時間6
秒)選びます。
3. ダルインジケータが点滅するまで、エクスプレッション
ダルを深く踏み込み、録音待機状態にします。
4. したギターでフレーズ等を弾きます。ギターを弾いた時点
で自動的に録音が開始され、ペダルインジケータが点滅から
点灯に変わります。
5. 録音時間が経過すると、その時点で録音を終了します。途中で
録音を終了することはできません。録音をやり直すときは「3.
ペダル・イ ジケータが...」からくり返してください。
6. エクスプレッション・ペ ルを操作します。
LOOP1(ループ1)
フレーズを録音すると同時にループくり返し)再生をします。
ダルを戻す(音量最小)にするとフレーズの最初にもどりペダル
を踏むと、びループ(くり返し)生をします。ダルで再生音量
を調整します。
LOOP2(ループ2)
ペダルでループの長さを調整しますペダルを戻すほどループの
長さが短くなり、小の時にループ再生されなくなります。
ループ1、2の操作方法
1. ダルエフェクトにLOOP1または、LOOP2選ぶか、その
エフェクトが使われているプログラムを選びます。
2. バリューツマミ3で最大録音時間Sは高音質3秒、Lは長時間
6秒)設定します。
3. ダルインジケータが点滅するまで、エクスプレッション
ダルを深く踏み込み、録音待機状態にします。
4. したギターでフレーズ等を弾きます。ギターを弾いた時点
で自動的に録音が開始され、ペダインジケータが点滅から
点灯に変わります。

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results