Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
59
4.資料

4. 資料

エクスプレッションペダルの調整

(キャリブレーション)

エクスプレッションダルが使用しにくい場合は、この操作を
行って最適に動作するように調整します。例えば、踏み込んだとき
にエフェクトが最大にならなかったり、逆に戻したときに最小に
ならなかったりする場合は、以下の操作で調整をしてください。
調整するときは、でペダルを操作してください。
足で操作すると、確に調整できないことがあります。
1. EXITスイッチとPEDALスイッチを同時に押しながら電源
をオンにします。マルチディスプレイに約1秒間PEDAL
表示されてからMINと表示されます。
2. ペダルをゆっくりと戻し、止まったら手を離しWRITEスイッ
チを押します。マルチディスプレイの表示がMINから
MAXに変わります。
調整を中止するときは、EXITスイッチを押してください。
電源オン時の画面になり、プログラムモードに入ります。
3. ペダルをゆっくりと押し、止まったら手を離しWRITEスイッ
チを押します。
マルチディスプレイに約1秒間COMPLTと表示されてから
電源オン時の画面になり、プログラム・モ ードに入ります。
調整後、ペダルの状態を確認してください。
例えば、ペダルエフェクトのタイプをVOLUME値を0
設定し、したときのMIN時のレベルで確認する等、わかりや
いエフェクトを割り当てて確認してください。
調整に失敗すると、マルチディスプレイにERRORと表
示され、調整前の画面MINと表示戻ります。何回調整
してもERRORと表示されるときは故障の可能性があり
ます。そのときは、(株)コルグ営業技術課または、お買い上
げ店にお問い合わせください。

ユーザー・プログラムを工場出荷時の

状態に戻すには(再ロード)

1. EXITスイッチとPROG/FXSELECTスイッチを同時に押し
ながら、 源をオンにします。マルチディスプレイに
RELOAD?と表示されます。
2. WRITEスイッチを押します。
マルチ・デ ィスプレイがRELOADにかわり再ロードが始
ります。
再ロードが終わるCOMPLTと約1秒間表示されて
から電源オン時の画面になり、プログラムモードに入ります。
再ロード中は絶対に電源をオフにしないでください。
再ロードすると、それまでのユーザープログラムはすべて
書きかわります。また、ズムの設定も初期化されます。

故障かな?と思ったら

故障かな?と思ったら、まず以下のことを確認してください。
状が改善されない場合は、お近くの販売店またはコルグ営業技術
課までお問い合わせください。
1. 電源が入らない
電池が入っていますか?またはコンセントにACアダプターが
接続されていますか?P.53)
INPUT端子にモノラル標準ケーブルが接続されていますか?
P.53)
2. 音が出ない
*ギアンプ、ッドホンはそれぞれの端子に正しく接続さ
れていますか?P.53)
*アンプ電源がオンになっていて、正しく設定されています
か?
接続ケーブルが断線していませんか?
AX100GMASTERVOL.(マスターボリューム)がしぼ
ていませんか?P.54)
AX100Gのプログラムごとのレベルが0または、小さい値
になっていませんか?P.57、64)
*ドライブ・ア プ・エ フェトのLEVELが0または、小さ
値になっていませんか?
ギター側のボリュームを絞っていませんか?
AX100Gがミュートになっていませんか?
*ペル・エ VOLUMEを選んでいて、ペダルが戻り
きっていませんか?
3. エフェクトがかからない
*バパスになっていませんか?P.54)
プログラムで使うエフェクトがオンになっていますか?
P.54)
4. リズムが動作しない
プログラムモードまたは、エフェクトセレクトモードに
なっていますか?
フレーズレーナモードではリズムは動作しません。
*リムのレベルが0になっていませんか?P.55)
5. ペダルが動作しない
*ペエフェクトが、使われているプログラムを選んでいま
すか?P.54)
*ペ・イ ジケータが点灯していますか?P.52、55)
*エスプレッションペダルの調整(キャリブレーション)をし
てみてください。P.59)
6. ライトができない
(マルチ・ディスプレイにERRORと表示される)
再ロード中に電源をオフにしませんでしたか?
再ロードしてください。P.59)

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results