Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
55

2.演奏してみましょう

リズム
RHYTHMスイッチを押す(LEDが点灯)とリズム演を始めま
す。バリューツマミ1でリズムパターン(50種類)選び、
リューツマミ2でテンポ(範囲40〜208)リューツマミ3で
リズム・レ (範囲0〜30)を設定します。
リズム演奏を止める時は演奏中にRHYTHMスイッチを押して
ください。
バイパス、ミュート、エディットに入るとリズムは止まり
ます。

AUXIN

AUXIN端子にオーディオ機器(CDMDなどを接続するとエ
フェクト音をミックスしてモニターでき、曲に合わせて練習する
ときに便利です。
フレーズ・トレーナ・モード以外では自動的にAUX入力と
エフェクト出力がミックスされてOUTPUT端子から出力
されます。
AUXINの音量はオーディオ機器側で調整してください。

エクスプレッションペダル

エクスプレッションダルで、23種類のペダルエフェクトを、
リアルタイムにコントロールすることができます。
プログラムにペダル・エ フェクト使われているときは、ペダルの
踏み込み具合に応じてペダインジケータが点灯します。なお、
ペダルエフェクトのSAMPLE1LOOP2は他のエフェクトと
は操作方法が異なりますP.62参照)

エクスプレッション・ペダルを使った演奏

1. プログラムモードでエクスプレッション・ペ ダルが使えるプ
ログラムを選択します。
2. ペダルインジケータが点灯していることを確認します。点灯
してなければ、エクスプレッション・ペ ダルを1回深く踏み込
んで、一番上のペダルインジケータを点灯(ペダルをオン)
せてください。
3.
ギターを演奏しながら、エクスプレッションペダルを操作しま
す。ペダルを上下させると、それに応じて出力音が変化します。
ペダル・エフェクトでVOLUMEを選択したときは、エクス
プレッション・ペ ダ ルのオン、オフはできません。オンのま
(ペダル・インジケータが点灯)になります。
エクスプレッションペダルのオン、オフは各プログラムに
記憶されません。
エクスプレッション・ペ ダ ル には必要以上の力を加えない
ようにしてください。あらかじめペダルインジケータの点
灯や、フェクトのかかり具合に必要な力を確認してから、
エクスプレッション・ペ ダ ルを操作してください。

エフェクト・セレクト・モード

このモードでは演奏中に、DOWNスイッチを押すとドライブ
ンプチャンネルの切り替えができます。また、UPスイッチを押
すとモジュレーション、アンビエンスエフェクトのオン、オフが
できます。
プログラムモードと同様にディットやリズム、ログラムの
ライトなどの操作を行うことができます。
このモードでは、プログラムの切り替えやバイパス、ミュー
トはできません。

エフェクト・レクト・ードに入る

プログラムモードで、PROG/FXSELECTスイッチを押すと、
エフェクトセレクトモードに入ります。マルチィスプレイ
FXSELンバーLEDは と表示します。

ドライブ・アンプ・チャンネルの切り替え

1つのプログラムにはあらかじめ2種類のドライブアンプ
フェクトがライトされていて、プログラム切り替えなくてもバッ
キングとソロといった使い分けができます。
DOWNスイッチを押すたびにチャンネルA、Bの2種類のドライ
アンプフェクトの設定が切り替わります。チャンネルAの
ときはDRIVEAMPスイッチ横のLEDが緑で点燈しチャンネ
ルBのときは赤く点燈します。

モジュレーション、ンビエンス・エフェクトのオン、

オフINDIVIDUAL)

UPスイッチを押すたびにモジュレーションエフェクトや、アン
ビエンスフェクトのオン、フができます
UPスイッチを押すことによりオン、オフされるエフェクトはあ
らかじめプログラムで設定します。
設定方法
1. NRLEVスイッチを押します。
2. バリュー・ツ マミ3を回してマルチディスプレイの表示を設
定に合わせて変えます。
MOD: ュレーションエフェクトのみオン、オフ
AMB: アンビエンス・エ ェクトのみオン、オフ
M+A: モジュレーションとアンビエンスエフェクトの両方
をオン、オフ
モジュレーションとペダルのエフェクト、またはペダルと
アンビエンスのエフェクトでは、同時に使用できないエ
フェクトがあります。このような組み合わせの、エフェクト
の両方をオンにしようとしたときは、先にオンになってい
た方が自動的にオフになります。

エフェクト・レクト・ードから出る

PROG/FXSELECTスイッチか、EXITスイッチを押すとプログ
ラムモードに戻ります。

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results