Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
5

2. Playing the AX100G

The modes of the AX100G

The AX100G is divided into three modes: Program mode, Effect
Select mode, and Phrase Trainer mode.
Program mode
In this mode you can select programs and use the AX100G for
normal performance.
Use the foot switches (UP, DOWN) to select programs.
Immediately after the power is turned on, the AX100G will al-
ways be in this mode. With the factory settings, the User pro-
grams contain the same programs as the Preset programs.
Effect Select mode
In this mode you can use the foot switches UP or DOWN to
switch the drive amp channel*
1
, Modulation effect or Ambience
effect on/off.
Programs cannot be selected in this mode. Use Program mode to
select programs.
*1 The AX100G provides two (A and B) Drive (distortion) Amp Effects so
that you can switch between settings such as backing and solo without
having to change programs.
Phrase Trainer mode
This mode allows you to record a phrase from a CD or MD con-
nected to the AUX IN jack, and play it back as a repeated loop
that you can practice along with.
Since you can slow down the playback speed without affecting
the pitch, this is a convenient way to learn or practice difficult
phrases.
When you enter Phrase Trainer mode, the Modulation, Pedal,
and Ambience effects will be turned off automatically.
In Program mode and Effect Select mode, you can use the various
knobs to edit the effect, adjust noise reduction, adjust the program
level, and change the program name.

Installing the batteries

1. Lightly press on arrow A of the battery case, and slide the lid
upward in the direction of the arrow to open the case.
2. Insert four AA alkaline batteries (sold separately) as shown in
the diagram. Be careful to observe the correct polarity (+ and
-) of the batteries.
3. Close the lid of the battery case.
If you will not be using the unit for an extended period of time,
remove the batteries to prevent them from leaking.
When the multi-display blinks "
BATTERY
," it is time to replace
the batteries. Please install new batteries as soon as possible.

2. Playing the AX100G

Example connections

The power must be off when making connections. Otherwise, dam-
age to your speaker system, or other malfunctions may occur.
Connecting cables are sold separately.
Headphone (*1)
Audio system
Stereo 1/4" jack –
stereo RCA (phone jack)
Hard disk recorder etc.
Mono output – mono 1/4" jack / stereo
output - two mono 1/4" jacks
Guitar amp / powered monitor(*1)
Mono 1/4" jack –
mono 1/4" jack
Guitar
AC adapter (*2)
to AC outlet
Mono 1/4" jack –
mono 1/4" jack
*1: The OUTPUT jack is a stereo output. If you use a mono
cable to connect the AX100G to a guitar amp, only the L
(left) side signal will be output to the amp.
*2: If you use batteries, the AC adapter is not necessary. If
you use an AC adapter, be sure to use only the specified
model (DC 9V
).

Turn on the power

The AX100G does not have a power switch.
The power will be turned on when one of the following occurs.
If you are using batteries, the power will be turned on when
you connect a mono cable to the INPUT jack. To maximize the
battery life, disconnect the cable from the INPUT jack when
you are not using the AX100G.
If you connect a stereo cable, the power will not be turned on.
If you are using the AC adapter (sold separately),
the power
will be turned on when you connect the AC adapter to a DC 9V.
Before you turn off the power of the AX100G, turn off the power
of the other connected equipment.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results