Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
47

4. Anhang

2. Wählen Sie mit Regler „3“ die maximale Aufnahmedauer („S
entspricht 3 Sekunden bei hoher Qualität; „L“ entspricht 6
Sekunden und ist also doppelt so lang.)
3. Drücken Sie das Schwellpedal so weit hinunter, bis die Pedal-
anzeige blinkt. Hierdurch aktivieren Sie die Aufnahmebereit-
schaft.
4. Spielen Sie die Phrase, die gesampelt werden soll. Die Auf-
nahme wird automatisch gestartet, sobald Sie auf der Gitarre
spielen. Die Pedalanzeige blinkt nun nicht mehr, sondern
leuchtet konstant.
5. Sobald die Aufnahmedauer verstrichen ist bzw. wenn Sie das
Pedal noch einmal vollständig hinunter drücken, hält die
Aufnahme an. Die Pedalanzeige erlischt nun und die aufge-
nommene Phrase wird –als Schleife– fortwährend wiederholt.
6. Bedienen Sie das Expressionpedal.

AMB (Ambience-Effekt)

Regler 1 Regler 2 Regler 3 Regler 4 Regler 5
TYPE TIME TONE FEEDBACK MIX
DELAY 10 [ms]...2 [SEC] 0...10.0 0...10.0 0...10.0
ROOM1 ——0...10.0
ROOM2 ——0...10.0
GARAGE1 ——0...10.0
GARAGE2 ——0...10.0
HALL ——0...10.0
ARENA ——0...10.0
Hier finden Sie räumliche Effekte jeder Art, also Hall, Delay und
Echoeffekte. Die Parameterzuordnung zu den Reglern lautet wie
folgt:
Regler 1 TYPE hlen Sie hiermit den Effekttyp
Regler 2 TIME Verzögerungszeit
Regler 3 TONE Einstellen der Klangfarbe
Regler 4 FEEDBACK Anzahl der Wiederholungen
Regler 5 MIX
Ve r hältnis zwischen Direkt- und Effektsignal.
DELAY (Delay)
Hierbei handelt es sich um einen Stereo-Delay-Effekt mit sepa-
rater Verzögerungszeit für den linken und rechten Kanal.
Drücken Sie die TAP-Taste mindestens dreimal, um den TIME-
Parameter von Regler „2“ auf den „getapten“ Tempowert zu stel-
len.
ROOM1 (Zimmerhall 1)
Tiefer Room Reverb
ROOM2 (Zimmerhall 2)
Heller Room Reverb
GARAGE1 (Garagenhall 1)
garagenartiger Hall 1
GARAGE2 (Garagenhall 2)
garagenartiger Hall 2
HALL (Saalhall)
Hall Reverb
ARENA (Stadionhall)
Hallverhalten in einem Stadion
ROOM (Zimmerhall)
Dieser Effekt simuliert den Hall eines kleinen Zimmers (z.B. ei-
nes Studios). Mit dem Pedal bestimmen Sie den Hallpegel.
GARAGE (Garagenhall)
Dieser Effekt simuliert den Hall eines relativ großen Raumes
wie z.B. einer Garage. Mit dem Pedal bestimmen Sie den Hall-
pegel.
HALL (Saalhall)
Dieser Effekt simuliert den Hall eines mittleren bis großen Saals.
Mit dem Pedal bestimmen Sie den Hallpegel.

Sampeln und mitspielen

Mit den Effekten SAMPLE1LOOP2 kann eine Phrase von ma-
ximal 6 Sekunden aufgezeichnet und anschließend wieder ab-
gespielt werden
Die Aufzeichnung beginnt erst, wenn Sie den eingestellten
Schwellwert überschreiten.
Bei Anwahl eines anderen Effekttyps oder -Programs bzw. bei
Verwendung des Phrase Trainers oder wenn Sie das Gerät aus-
schalten, wird die aufgenommene Phrase wieder gelöscht.
SAMPLE1 (Sample1)
Die aufgenommene Phrase wird wiedergegeben, wenn Sie das
Pedal nach unten drücken.
SAMPLE2 (Sample2)
Die aufgenommene Phrase wird wiedergegeben, wenn Sie das
Pedal nach unten drücken, und rückwärts abgespielt, wenn Sie
das Pedal zurückbewegen.
Arbeitsweise für die Effekte SAMPLE1 und 2
1. Wählen Sie als Pedal-Effekt SAMPLE1 oder SAMPLE2 oder
rufen Sie ein Program auf, das einen dieser Typen verwen-
det.
2. Wählen Sie mit Regler „3“ die Aufnahmedauer/Qualität („S
entspricht 3 Sekunden bei hoher Qualität; „L“ entspricht 6
Sekunden).
3. Drücken Sie das Schwellpedal so weit hinunter, bis die Pedal-
anzeige blinkt. Hierdurch aktivieren Sie die Aufnahmebereit-
schaft.
4. Spielen Sie die Phrase, die gesampelt werden soll. Die Auf-
nahme wird automatisch gestartet, sobald Sie auf der Gitar-
re spielen. Die Pedalanzeige blinkt nun nicht mehr, sondern
leuchtet konstant.
5. Sobald die maximale Aufnahmedauer verstrichen ist, hält die
Aufnahme an. Sie kann nicht von Hand angehalten werden.
Wenn Sie nicht zufrieden sind mit der Aufnahme, fangen Sie
bitte noch einmal mit Schritt 3 an.
6. Bedienen Sie das Expressionpedal.
LOOP1 (Loop1)
Gleich im Anschluss an die Aufnahme einer Phrase wird diese
wiederholt –als Schleife– abgespielt. Stellen Sie das Pedal wie-
der auf den Mindestwert, um zum Beginn der Phrase zurück-
zukehren. Drücken Sie das Pedal hinunter, um die Schleifen-
wiedergabe wieder zur starten. Nun können Sie mit dem Pedal
die Wiedergabelautstärke einstellen.
LOOP2 (Loop2)
as Pedal steuert die Länge des Loops. Der Loop wird um so
kürzer, je weiter Sie das Pedal zurückbewegen. Bei der Minimal-
länge wird der Loop überhaupt nicht abgespielt.
Arbeitsweise für die Effekte LOOP1 und 2
1. Wählen Sie als Pedal-Effekt LOOP1 oder LOOP2 oder rufen
Sie ein Program auf, das einen dieser Typen verwendet.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results