Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G

4. Anhang

46

PEDAL (Pedal-Effekt)

Regler 1
Regler 2
Regler 3
Regler 4
Regler 5 Pedal
TYPE
DEPTH/PITCH
MIX/LEVEL
VOLUME —0...10.0 Lautstärke
CHO1 0...10.0 Intensität
CHO2 0...10.0
Geschwindigkeit
VIBRATE 0...10.0
Geschwindigkeit
FLANGER 0...10.0 Modulation
PHASER 0...10.0
Geschwindigkeit
TREMOLO 0...10.0
Geschwindigkeit
PAN 0...10.0
Geschwindigkeit
WAH ——Peak-Frequenz
FILTER 0...10.0 Peak-Frequenz
RING 0...10.0 Tonhöhe
PITCH -24...24
[CENT]
0...10.0 Tonhöhe
F BACK1 0...10.0 Pegel+Reverb
F BACK2 0...10.0 Pegel+Reverb
DELAY 10
[ms]
...2
[SEC]
0...10.0 Effektpegel
ECHO 10
[ms]
...2
[SEC]
0...10.0
Verzögerungszeit
ROOM —0...10.0 Hallpegel
GARAGE —0...10.0 Hallpegel
HALL —0...10.0 Hallpegel
SAMPLE1 S/L Wiedergabe
SAMPLE2 S/L
Wiederg/Umkehr
LOOP1 S/L Lautstärke
LOOP2 S/L Schleifenlänge
Diese Effekte können Sie über das Reglerpedal in Echtzeit steu-
ern. Die Parameterzuordnung zu den Reglern lautet wie folgt:
Regler 1 TYPE Wählen Sie hiermit den Effekttyp
Regler 3
DEPTH/PITCH
Modulationsintensität/
Umfang der Tonhöhenänderung
Regler 5 MIX/LEVEL Ver hältnis zwischen Direkt- und
Effektsignal./Ausgangslautstärke
CHO1PITCH können nicht gleichzeitig mit einem
Modulationseffekt verwendet werden. Wenn Sie einen dieser Ef-
fekte in einem Program aktivieren, in dem bereits der
Modulationseffekt zum Einsatz kommt, wird letzterer automa-
tisch ausgeschaltet.
F BACK 1 und 2 können nicht gemeinsam mit den Ambience-
Typen ROOM1ARENA verwendet werden. Wenn also be-
reits ein Typ ROOM1ARENA eingeschaltet war, wird dieser
bei Anwahl von F BACK 1 oder 2 deaktiviert.
DELAYHALL können nicht gemeinsam mit dem Ambience-
Effekt verwendet werden. Wenn Sie einen dieser Effekte in einem
Program einschalten, das bereits einen Ambience- Effekt an-
spricht, wird letzterer automatisch ausgeschaltet.
SAMPLE1LOOP2 können nicht gemeinsam mit einem
Modulations- oder Ambience- Effekt verwendet werden. Wenn
Sie SAMPLE1LOOP2 in einem Program wählen, das bereits
einen Modulations- und Ambience-Effekt verwendet, werden
diese beiden Blöcke ausgeschaltet.
VOLUME (Lautstärke)
Das Schwellpedal fungiert als Volumenpedal. Mit Regler „5“
kann der kleinste mit dem Pedal einstellbare Wert gewählt wer-
den.
CHO1 (Chorus1)
Hierbei handelt es sich um einen Chorus-Effekt, dessen
Modulationsintensität über das Schwellpedal eingestellt werden
kann.
CHO2 (Chorus2)
Bei diesem Chorus-Effekt kann die Modulationsgeschwindigkeit
mit dem Pedal eingestellt werden.
VIBRATO (Vibrato)
Bei diesem Vibrato kann die Modulationsgeschwindigkeit mit
dem Pedal eingestellt werden.
FLANGER (Flanger)
Bei diesem Flanger können Sie mit dem Pedal das zu modulie-
rende Frequenzband einstellen.
PHASER (Phaser)
Bei diesem Phaser-Effekt können Sie mit dem Pedal die
Modulationsgeschwindigkeit des Effektes einstellen.
TREMOLO (Tremolo)
Bei diesem Tremolo-Effekt bestimmen Sie mit dem Pedal die
Geschwindigkeit, mit der die Lautstärke moduliert wird.
PAN (Panorama-Effekt)
Bei diesem Panorama-Effet bestimmen Sie mit dem Pedal die
Geschwindigkeit, mit der sich das Signal im Stereobild hin und
her bewegt.
WAH (Wah)
Bei diesem Effekt dient das Pedal zum Erzeugen der typischen
„Wahs“ durch Verschieben der Frequenzglocke.
FILTER (resonanzfähiges Filter)
Bei diesem Resonanzfilter bestimmen Sie mit dem Pedal die
Filterfrequenz.
RING (Ringmodulator)
Dieser Effekt erzeugt einen glockenähnlichen Klang, dessen Ton-
höhe mit dem Pedal eingestellt werden kann. Das beste Ergeb-
nis erzielen Sie, indem Sie das Halselement einschalten, die Hö-
hen der Gitarre drastisch reduzieren und um den 12. Bund her-
um spielen.
PITCH (Pitch Shifter)
Mit dem Pedal kann das Pitch Shift-Intervall eingestellt werden.
Wenn Sie Regler „5“ auf „0“ stellen, hören Sie nur das unbear-
beitete Signal. „5“ bedeutet, dass das Original- und transponier-
te Signal gleich laut sind. „10“ schließlich bedeutet, dass nur das
Effektsignal hörbar ist.
Feed Back
Bei diesem Effekt bestimmen Sie mit dem Pedal die Vibrato-In-
tensität des Rückkopplungssignals.
Spielen Sie eine Note auf der Gitarre und betätigen Sie das
Schwellpedal, um das Feedback- Signal hinzuzufügen. Nehmen
Sie das Pedal zurück, um das Feedback-Signal wieder auszu-
blenden. Mit Regler „3“ können Sie die Vibrato-Geschwindig-
keit einstellen.
Der Feedback-Effekt ist nicht belegt, wenn Sie als Drive Amp-
Typ OFF, ACOUSTIC oder CLASSIC COMP gewählt haben.
F BACK1 (Feedback1)
Das Feedback-Signal (Rückkopplung) hat dieselbe Tonhöhe
wie die gespielte Note.
F BACK2 (Feedback2)
Das Feedback-Signal befindet sich eine Oktave über der ge-
spielten Note.
DELAY (Delay)
Bei diesem Delay-Effekt können Sie mit dem Pedal den Eingangs-
pegel des Effektes einstellen.
Drücken Sie dreimal die TAP -Taste, um den TIME-Wert von Reg-
ler „3“ dem „Drucktempo“ entsprechend zu ändern.
ECHO (Echo)
Bei diesem Echo-Effekt kann die Verzögerungszeit mit dem Pe-
dal eingestellt werden. Wie bei einem Bandecho ändert sich bei
Anwahl eines anderen Verzögerungswertes auch zeitweilig die
Tonhöhe. Mit Regler „3“ kann die maximale Verzögerungszeit
eingestellt

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results