Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
43

4. Anhang

4. Anhang

Einstellen des Pedals (Kalibrierung)

Wenn Sie das Gefühl haben, daß das Reglerpedal schwierig zu
benutzen ist, führen Sie diesen Vorgang aus, um die optimale
Funktionsfähigkeit wiederherzustellen. Wenn beispielsweise der
maximale Effekt nicht erreicht wird, obwohl Sie das Pedal voll-
ständig durchgetreten haben, oder umgekehrt der Effekt nicht
die Minimaleinstellung erreicht, obwohl das Pedal ganz zurück-
gesetzt wurde, gehen Sie wie nachfolgend beschrieben vor, um
die notwendigen Einstellungen vorzunehmen.
Wenn Sie diese Einstellungen vornehmen, betätigen Sie das Pe-
dal mit der Hand. Bei einer Fußbetätigung kann es vorkommen,
daß die Kalibrierung nicht ordnungsgemäß ausgeführt wird.
1. Schalten Sie das AX100G ein, während Sie gleichzeitig die
EXIT-Taste und die PEDAL-Taste betätigen. In der Namens-
anzeige erscheint etwa eine Sekunde lang „PEDAL“, nachfol-
gend dann „MIN.“.
2. Drücken Sie das Pedal ganz nach vorne. Wenn es anschlägt,
lassen Sie es los und betätigen Sie die WRITE-Taste. Im Dis-
play erscheint statt „MIN.“ nun „MAX.“.
Wenn Sie den Vorgang abbrechen wollen, betätigen Sie die
EXIT-Taste. Die normale Einschaltmeldung erscheint, nach-
folgend wird der Programme-Modus aufgerufen.
3. Drücken Sie das Pedal nun ganz nach hinten. Wenn es an-
schlägt, lassen Sie es los und betätigen Sie die WRITE-Taste.
3. Langsam drücken!
2. Langsam drücken!
Im LC-Display erscheint für etwa eine Sekunde die Meldung
COMPLT“. Nachfolgend erscheint die normale Einschalt-
meldung, und der Programme-Modus wird aufgerufen.
Nach Abschluß der Einstellungen prüfen Sie das Verhalten des
Pedals.
Wählen Sie dazu einen Effekt, der die Überprüfung der Einstel-
lungen leicht macht; weisen Sie beispielsweise dem Pedal den
Effektblock VOLUME zu, wählen Sie als Einstellung 0 und prü-
fen Sie den MIN-Pegel, wenn das Pedal vollständig nach vorne
gedrückt ist.
Unterläuft Ihnen während der Kalibrierung ein Fehler, so er-
scheint im Display die Meldung „
ERROR
“, gefolgt von der vor-
hergehenden Displayanzeige („
MIN
.“). Erscheint die Meldung
ERROR
“ wiederholt, so könnte eine Fehlfunktion aufgetreten
sein. Wenden Sie sich in diesem Fall an Ihren KORG-Händler

Wiederherstellen der Werksein-

stellungen

1. Schalten Sie das AX100G ein, während Sie gleichzeitig die
EXIT-Taste und den PROG/FX SEL-Taste betätigen. In der
Namensanzeige erscheint die Meldung „RELOAD?“.
2. Betätigen Sie die WRITE-Taste. In der Multi-Display erscheint
die Meldung „RELOAD“, und der Vorgang beginnt. Wenn der
Vo rgang abgeschlossen ist, erscheint für etwa eine Sekunde
die Meldung „COMPLT“. Nachfolgend erscheint die norma-
le Einschaltmeldung, und der Programme-Modus wird auf-
gerufen.
Schalten Sie das Gerät während dieses Vorgangs niemals ab.
Beim Laden der Werkseinstellungen werden alle User-Programs
und Rhythm-Parameter wieder auf die Vorgabewerte zurückge-
stellt.

Problemhilfe

Wenn ein Fehlfunktion auftritt, prüfen Sie zunächst die nachfol-
gend aufgeführten Punkte. Können Sie das Problem damit nicht
lösen, so wenden Sie sich an Ihren KORG-Händler.
1. Das Gerät läßt sich nicht einschalten
Sind Batterien eingelegt? Oder ist der Wechselstromadapter
mit einer Netzsteckdose verbunden? (S.37)
st ein Mono-Klinkenkabel an die INPUT-Buchse angeschlos-
sen? (S.37)
2. Keine Klänge hörbar
Sind Ihre Gitarre, Ihr Verstärker und/oder Ihre Kopfhörer an
die richtigen Buchsen angeschlossen? (S.37)
Ist Ihr Verstärker eingeschaltet und richtig eingestellt?
Ist ein Kabel defekt?
Haben Sie den MASTER VOL.-Regler des AX100G auf den
Mindestwert gestellt? (S. 38)
Ist beim Programm des AX100G eine niedrige Lautstärke (oder
0“) eingestellt. (S.41, 48)
Ist für den Parameter LEVEL im Effekte DRIVE·AMP ein nied-
riger Wert (oder „0“) eingestellt?
Ist die Lautstärke Ihrer Gitarre aufgedreht?
Ist das AX100G stummgeschaltet?
Falls dem Reglerpedal der Parameter VOLUME zur Steue-
rung zugewiesen wurde, ist das Pedal eventuell ganz nach
vorne durchgedrückt?
3. Es sind keine Effekte zu hören.
Befindet sich das AX100G im Bypass-Modus. (S.38)
Sind die vom Programm verwendeten Effekte aktiviert. (S.38)
4. Das Rhythmus funktioniert nicht.
Haben Sie den Programme - oder den Effektwahl-Modus se-
lektiert (im Phrase Trainer-Modus kann das Metronom nicht
eingeschaltet werden)?
Haben Sie für das Metronom die Lautstärke „0“ gewählt.
(S.39)

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results