Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
41

3. Editierung

3. Editierung

Im Program- und Effektwahl-Modus können Sie die
Effekte editieren, die Rauschunterdrückung und den
Program-Pegel einstellen sowie den Namen des
Programs eingeben.
Beim Editieren blinken die Editiersymbole sowie die
Dioden neben den Wahltasten der einzelnen Effekt-
blöcke.
Um ein editiertes Program auch später noch verwenden zu kön-
nen, müssen Sie es mit „Program Write“ speichern. Wenn Sie
den AX100G ausschalten, ohne Ihre Einstellungen zu speichern,
werden Ihre Änderungen wieder gelöscht.
EDIT-Symbol
Parameterwert
The dem von Ihnen bewegten
Regler zugewiesene Parameter

Editieren der Effekte

Den Drive Amp-Effekt können Sie sofort editieren, indem Sie an
den Reglern „1“—„5“ sowie Type drehen. Sie brauchen die
DRIVE·AMP-Taste also nicht erst zu drücken. (Siehe auch
„Editieren des Drive Amp-Effektes“ weiter unten.)
Um einen anderen Effekt zu editieren, müssen Sie seine Taste
drücken. Hierdurch aktivieren Sie den Editierbetrieb dieses Ef-
fektes (Diode blinkt).

Editieren des Drive Amp-Effektes

Wenn der Drive Amp-Effekt eingeschaltet ist, können Sie mit dem
Type-Regler den gewünschten Verzerrungstyp wählen. Die üb-
rigen Parameter lassen sich mit den fünf Reglern wunschgemäß
einstellen. Während dieser Editierung zeigt das Multi-Display
jeweils den Parameternamen des verwendeten Reglers sowie
dessen aktuellen Wert an.
Auch wenn derzeit der Modulations- oder Pedal-Effekt editiert
werden kann, dient der Type- Regler weiterhin zum Aufrufen
eines anderen Drive Amp-Typs.
Wenn die Regler „1“—„5“ derzeit andere Funktionen haben bzw.
wen der Bypass-, Mute- oder Phrase Trainer-Modus aktiv ist,
können die Regler nicht zum Editieren verwendet werden.
Wahl des Drive Amp-Kanals
Pro Program können zwei Drive Amp-Kanäle (A und B) einge-
stellt werden.
Drücken Sie die DRIVE·AMP-Taste rechts auf der
Bedienoberfläche, um den zu editierenden Kanal zu wählen. Bei
wiederholtem Drücken dieser Taste leuchtet die dazugehörige
Diode abwechselnd grün (Kanal A) und rot (Kanal B).

Editieren des Drive Amp-Effektes (Beispiel)

Als Beispiel wollen wir Ihnen hier zeigen, wie man für Kanal B
den Drive Amp-Typ TUBE OD wählt.
1. Drücken Sie die DRIVE·AMP-Taste so oft, bis Kanal B (Diode
leuchtet rot) gewählt ist.
2. Wenn das Multi-Display nun bereits „TUBE OD“ anzeigt,
braucht die Einstellung nicht geändert zu werden. Sonst müs-
sen Sie mit dem Type-Regler TUBE OD wählen. Wenn sich
der Type-Regler derzeit bei TUBE OD befindet, müssen Sie
kurz einen anderen und dann wieder diesen Typ wählen.
3. Die Diode neben dem Drive Amp-Effekt beginnt zu blinken,
um anzuzeigen, dass dieser Effekt editiert werden kann. (Im
Multi-Display wird nun „TUBE OD“ angezeigt.) Wenn Sie
wieder den gespeicherten Wert einstellen, erscheint das Ori-
ginal-Symbol im Multi-Display.
4. Die fünf Regler sind den Parameteren GAIN, TREBLE,
MIDDLE, BASS und LEVEL zugeordnet. Stellen Sie diese also
wunschgemäß ein. (Siehe außerdem „Effektparameter“ auf S.
44.)
5. Wenn Sie an einem Regler drehen, ändert sich der Klang, wäh-
rend das Display den Namen und den Wert des zuletzt einge-
stellten Parameters anzeigt. Wenn Sie für diesen Parameter
danach wieder den gespeicherten Wert wählen, erscheint das
Original-Symbol im Multi- Display.
Parameter
Parameterwert
DRIVE·AMP
switch
Channel A/B display
ORIG-Symbol
Wenn Sie den Drive Amp-Effekt nicht brauchen, müssen Sie mit
dem Type-Regler OFF wählen, um den Drive Amp-Effekt zu
umgehen. Im Multi-Display erscheint dann die Meldung „DRV
OFF“. Außerdem erlischt die Diode neben der DRIVE·AMP-Ta-
ste.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results