Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
4

1. Introduction

Max.
8mm

Front and rear panel

Front panel

1 Type knob

This knob selects the type of Drive Amp effect that will be used.

2 Value knobs

For each effect, these knobs adjust the values of the param-
eters assigned to the knobs. From the left, these are referred to
as value knobs 1—5.
When you are not editing an effect, parameters of the drive
amp effect used by the selected program are assigned to these
knobs. (Refer to p.9 "Drive Amp effect Quick Edit function.")

3 Select switches

Each time you press the DRIVE·AMP switch, the drive amp
channels A and B will alternate, and will be in Edit mode. At
this time, the LED beside the switch will change between blink-
ing green (channel A) and blinking red (channel B).
Each time you press the MOD, PEDAL, AMB, or CABI switch,
the corresponding effect will be in edit mode (on) or off. The
LED beside the corresponding switch will also change between
blinking (lit) and dark.
Each time you press the NR LEV switch, you will alternate
between editing and on. The LED beside the switch will change
between blinking and dark.
Each time you press the RHYTHM or PHRASE TRAINER
switch, the corresponding function will be switched on/off.
The LED beside the corresponding switch will light or go dark.

4 Pedal indicator

This shows the state of the pedal effect (the depth to which it is
pressed). When the tuner is operating, this shows the amount
of pitch deviation. In Phrase Trainer mode, this shows the re-
cording/playback time.

5 PROG/FX SELECT switch

Each time you press this switch, you will alternate between
Program mode and Effect Select mode.

6 Multi-display

This displays information such as program names, parameter
names and values, and editing icons.

7 Number LED

This displays the program bank and program number. While
the Tuner is operating, it displays the note name.

8 WRITE, EXIT, TAP switches

The WRITE switch is used to write an edited program.
By pressing the EXIT switch, you can return to Program mode
at any time.
When using a delay effect, you can press the TAP switch at the
tempo of the song to set the delay time automatically.

9 DOWN, UP switches

These switches are used to select programs, bypass or mute, or
to switch the drive amp channel.

0 Expression pedal

This controls the effect that is selected as the Pedal effect. After
advancing the pedal all the way, you can press the pedal more
firmly to switch the Pedal effect on/off.

Rear panel

1 INPUT jack

If you are using batteries, this jack acts as a power switch.
When a cable is connected, the power will be turned on.
Before turning the power on or off, be sure to turn down the
volume of any equipment that is connected.

2 Input level switch

Set this switch according to the output of your instrument.

3 AUX IN jack (stereo mini)

Connect the output (AUX OUT: analog) of your audio device
to this jack.

4 DC9V

The separately sold AC adapter (DC9V ) can be con-
nected here. When this is connected, the power will be turned
on automatically.

5 Cable hook

If the separately sold AC adapter is con-
nected, hook the cable of the AC adapter
around this hook as shown below. When
removing the cable from the hook, do not
apply tension.

6 MASTER VOL. (Master volume)

This adjusts the volume of the OUTPUT jack.

7 OUTPUT jack

This also functions as the headphone jack.

8 Cable guide

This prevents the cable that connects
the guitar to the AX100G from inter-
fering with the operation of the pedal.
Pass the cable through the guide as
shown in the diagram below.
When using the cable guide, please
use a cable whose diameter is 8 mm
or less.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results