Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
39

2. Spielen mit dem AX100G

Verwendung der Rhythm-Funktion

Drücken Sie die RHYTHM-Taste (Diode leuchtet), um die Wie-
dergabe eines Rhythmus- Pattern zu starten. Mit Regler „1“ kön-
nen Sie nun eine andere Rhythmusbegleitung wählen (es gibt 50
Typen). Mit Regler „2“ kann das Tempo eingestellt werden (40—
208). Verwenden Sie Regler „3“ zum Einstellen der Rhythm-Laut-
stärke (0—30).
Um die Rhythmusbegleitung wieder anzuhalten, müssen Sie
RHYTHM noch einmal betätigen.
Beim Aktivieren des Bypass-, Mute- oder Edit-Modus’ hält die
Rhythmuswiedergabe an.

AUX IN

Das an der AUX IN-Buchse anliegende Signal (z.B. eines CD-
oder MD-Spielers) kann zu den Effektsignalen des AX100G hin-
zugefügt und gemeinsam mit diesen ausgegeben werden, so dass
Sie auch zu Ihren Lieblingstiteln spielen können.
Außer wenn gerade der Phrase Trainer-Modus gewählt ist, wer-
den die über AUX IN empfangenen Signale gemeinsam mit den
Effektsignalen des AX100G zur OUTPUT-Buchse übertragen.
Die Lautstärke der an AUX IN angeschlossenen Signalquelle
muss auf dem betreffenden Gerät selbst eingestellt werden.

Schwellpedal

Mit dem Schwellpedal kann jeweils einer von 23 Pedal-Effekt-
typen in Echtzeit angesteuert werden.
Wenn Sie ein Program mit Pedal-Effekt aufgerufen haben, leuch-
ten die Dioden des Pedals, um den Höchst- und Mindestwert
anzeugen, die per Fuß eingestellt werden können. Im Falle der
Effekte SAMPLE1LOOP2 verhält sich das Pedal jedoch etwas
anders (siehe S. 46).
Verwendung des Reglerpedals während der Spiels
1. Wählen Sie im Programme-Modus ein Programm aus, wel-
ches das Reglerpedal verwendet.
2. Schauen Sie nach, ob die Pedalanzeige leuchtet. Ist das nicht
der Fall, so müssen Sie das Pedal so weit wie möglich hin-
unterdrücken, damit die oberste Diode der Pedalanzeige
leuchtet (das bedeutet, dass das Pedal eingeschaltet ist).
3. Spielen Sie auf Ihrer Gitarre und betätigen Sie dabei das Regler-
pedal. Je nachdem, in welche Richtung Sie das Pedal drük-
ken, ändert sich der Klang entsprechend.
Wenn Sie als Pedaleffekt VOLUME wählen, kann die Pedal-
funktion nicht ein-/ ausgeschaltet werden. Deshalb leuchtet die
Pedalanzeige immer.
Der Pedalstatus (ein/aus) wird nicht im jeweiligen Programm
gespeichert.
Üben Sie keinen übermäßigen Kraftaufwand auf das Reglerpedal
aus. Bevor Sie das Pedal bedienen, loten Sie den Kraftaufwand
aus, der notwendig ist, um das Pedalanzeige und den Effekt an-
zuwenden.

Effektwahl-Modus

In diesem Modus können Sie mit DOWN abwechselnd den ei-
nen und den anderen Drive Amp- Kanal wählen. Mit UP kön-
nen Sie den Modulations- und Ambience-Effekt ein- und aus-
schalten.
Wie auch im Programme-Modus können Sie hier Einstellungen
editieren, das rhythmus verwenden und Programme speichern.
In diesem Modus können Sie Programme nicht wechseln oder
den Bypass-Modus bzw. die Stummschaltung aktivieren.
Ein-/Ausschalten
von MOD/AMB.

Programme-

Modus

Effektwahl-

Modus

So lange drücken, bis die
LED-Nummer zu blinken beginnt.
Mit PROG/FX SELECT kann
ein anderer Modus gewählt
werden.
Vorige
Bank
Nächste
Program
Anwahl des
jeweils anderen
Drive Amp-Kanals.
Nächste
Bank
Vorige
Program

Aufrufen des Effektwahl-Modus

Wenn derzeit der Program-Modus aktiv ist, müssen Sie PROG/
FX SELECT betätigen, um den Effektwahl-Modus zu wählen.
Im Multi-Display erscheint nun die Meldung „FX SEL“, wäh-
rend das numerische LE-Display „
“ anzeigt.
Wechseln des Drive Amp-Kanals
Alle Programme enthalten zwei separate Drive Amp-Effekteins-
tellungen, so dass Sie mühelos vom Begleit- zum Solo-Sound und
zurück wechseln können.
Mit DOWN wählen Sie abwechselnd Kanal A und B. Wenn Ka-
nal A gewählt ist, leuchtet die Diode neben der DRIVE·AMP-
Taste grün. Wählen Sie Kanal B, so leuchtet diese Diode rot.
Ein-/Ausschalten des Modulations- und Ambience-
Effektes
(INDIVIDUAL)
Mit UP können Sie den Modulations- oder Ambience-Effekt ab-
wechselnd ein- und ausschalten.
Mit folgendem Verfahren können Sie einstellen, welcher Effekt-
block über UP ein- und ausgeschaltet werden kann:
Arbeitsweise
1. Drücken Sie NR LEV.
2. Sorgen Sie mit Regler „3“ dafür, dass im Display die benötig-
te Einstellung angezeigt wird.
MOD: Es kann nur der Modulationseffekt ein-/ausgeschaltet
werden.
AMB: Es kann nur der Ambience-Effekt ein-/ausgeschaltet
werden.
M+A: Sowohl der Modulations- als auch der Ambience-Ef-
fekt werden ein-/ausgeschaltet.
Bestimmte Effektprogramme lassen die Simultanverwendung des
Modulations- und Pedal- Effektes bzw. des Ambience- und Pe-
dal-Effektes nicht zu. In dem Fall wird der eine Effekt ausge-
schaltet, wenn Sie den anderen aktivieren und umgekehrt.

Verlassen des Effektwahl-Modus

Betätigen Sie den PROG/FX SELECT-Taste oder die EXIT-Ta-
ste, um wieder in den Programme-Modus zurückzukehren.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results