Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G

1. Einleitung

36
Max.
8mm

Vorder- und Rückseite

Vorderseite

1 Type-Regler

Hiermit kann der benötigte Drive Amp-Effekt gewählt werden.

2 Regler „1“—„5“

Diese Regler sind jeweils den Parametern des gewählten Effekt-
typs zugeordnet. Die Regler wollen wir im weiteren Verlauf
(von links nach rechts) „1“ bis „5“ nennen.
Solange Sie keinen Effekt editieren, sind die Regler den Para-
metern des Drive Amp-Effektes zugeordnet. (Siehe „Editieren
des Drive Amp-Effektes“ auf S. 41.)

3 Effektwahltasten

Bei wiederholtem Drücken der DRIVE·AMP-Taste wählen Sie
abwechselnd Kanal A und B des Drive Amp-Effektes. Außer-
dem wird der Editierbetrieb aktiviert. Die Diode neben dieser
Taste blinkt abwechselnd grün (Kanal A) oder rot (Kanal B).
Drücken Sie die Taste MOD, PEDAL, AMB oder CABI, um
den zugeordneten Effekt ein- oder auszuschalten bzw. um ihn
editieren zu können. Die dazugehörige Diode zeigt jeweils den
Status an: leuchtet, aus und blinkt (Editieren).
Durch wiederholtes Drücken der NR LEV-Taste wählen Sie
abwechselnd den Editierbetrieb (Diode blinkt) und den An-
Status (Diode leuchtet).
Mit den Tasten RHYTHM und PHRASE TRAINER können Sie
die dazugehörige Funktion abwechselnd ein- und ausschalten. Die
Diode neben der gedrückten Taste leuchtet dann bzw. erlischt.

4 Pedalanzeige

Diese LED-Kette zeigt den Status des Pedaleffektes (d.h. wie
weit das Pedal gedrückt ist) an. Wenn die Stimmfunktion (Tu-
ner) aktiv ist, zeigen diese Dioden an, wie genau die gespielte
Note gestimmt ist. Im Phrase Trainer-Modus wird hiermit die
Aufnahme-/Wiedergabedauer angezeigt.

5 PROG/FX SELECT-Taste

Mit dieser Taste wählen Sie abwechselnd den Program- (PROG)
und Effektwahl-Modus (FX SELECT).

6 Multi-Display

Hier werden der Program-Name, die Parameternamen und -
werte sowie für das Editieren wichtige Symbole angezeigt.

7 Nummern-LED

Hier werden die Program-Bank, und -Nummer angezeigt.
Wenn die Stimmfunktion (Tuner) eingeschaltet ist, erscheint
hier der Name der erkannten Note.

8 WRITE-, EXIT-, TAP-Tasten

Mit der WRITE-Taste kann ein editiertes Program gespeichert wer-
den. Die EXIT-Taste erlaubt die Rückkehr in den Program-Mo-
dus. Bei Verwendung eines Delay-Effekts können Sie durch wie-
derholtes Drücken der TAP-Taste die Verzögerungszeit einstel-
len.

9 DOWN- und UP-Taste

Mit diesen Tasten können Programs, der Bypass-Modus, die
Mute-Funktion (Stummschaltung) sowie der benötigte Drive
Amp-Kanal gewählt werden.

0 Schwellpedal

Hiermit kann der Effekt angesteuert werden, der als Pedal-
Effekt definiert wurde. Wenn Sie das Pedal vollständig hin-
unterklappen und dann noch etwas weiter treten, können Sie
den Pedal- Effekt ein- und ausschalten.

Rückseite

1 INPUT-Buchse

Wenn Sie Batterien für das Gerät verwenden, fungiert diese
Buchse als Netzschalter. Sobald Sie ein Kabel anschließen, ist
der Strom eingeschaltet.
Bevor Sie den Strom ein- oder ausschalten, sollten Sie die Laut-
stärke aller angeschlossenen Geräte zurückdrehen.

2 Eingangspegelschalte

Stellen Sie diesen Schalter dem Ausgangssignal Ihres Instru-
ments entsprechend ein.

3 Kopfhöreranschluß (Stereominiklinke)

Hier können Sie einen Kopfhörer anschließen.

4 DC9V

Hier können Sie den separat erhältlichen Wechselstromadapter
(DC9V
) anschließen. Sobald Sie den Anschluß herge-
stellt haben, ist der Strom automatisch eingeschaltet.

5 Kabelhalterung

Wenn Sie den separat erhältlichen
Wechselstromadapter anschließen, sollten
Sie dessen Kabel wie in der Abbildung un-
ten in der Halterung befestigen. Wenn Sie
das Kabel aus der Halterung nehmen, soll-
ten Sie es nicht zu stark ziehen oder anspan-
nen.

6 MASTER VOL.-Regler (allgemeine Lautstärke)

Hiermit bestimmten Sie die Lautstärke der an der OUTPUT-
Buchse anliegenden Signale.

7 OUTPUT-Buchse

Diese Ausgangsbuchse kann auch als Kopfhöreranschluss ver-
wendet werden.

8 Kabelhaken

Hiermit kann sichergestellt werden, dass sich das Gitarrenkabel
während des Betriebes nicht löst. Verlegen Sie das Kabel wie
in der Abbildung gezeigt.
Diese Kabelführung eignet sich nur
für Gitarrenkabel mit einem Durch-
messer von maximal 8mm.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results