Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
30

4. Appendices

PEDAL (effet Pedal)

Bouton 1
Bouton 2
Bouton 3
Bouton 4
Bouton 5 pedal
TYPE DEPTH/PITCH MIX/LEVEL
VOLUME —0...10.0 Volume
CHO1 0...10.0 Intensité
CHO2 0...10.0 Vitesse
VIBRATE 0...10.0 Vitesse
FLANGER 0...10.0 Modulation
PHASER 0...10.0 Vitesse
TREMOLO 0...10.0 Vitesse
PAN 0...10.0 Vitesse
WAH ——Fréquence
FILTER 0...10.0 Fréquence
RING 0...10.0 Hauteur
PITCH -24...24[CENT] 0...10.0 Hauteur
F BACK1 0...10.0
Niveau+Reverb
F BACK2 0...10.0
Niveau+Reverb
DELAY 10[
ms
]...2[
SEC
]0...10.0
Niveau d’effet
ECHO 10[
ms
]...2[
SEC
]0...10.0
Temps de retard
ROOM —0...10.0
Niveau Reverb
GARAGE —0...10.0
Niveau Reverb
HALL —0...10.0
Niveau Reverb
SAMPLE1 S/L Reproduction
SAMPLE2 S/L
Reprod./Inverse
LOOP1 S/L Volume
LOOP2 S/L
Temps de boucle
Ces modèles d’effets permettent d’utiliser la pédale d’expression
pour contrôler l’effet en temps réel. Voici l’assignation des para-
mètres aux boutons 1—5
Bouton 1 TYPE Choisit le type d’effet
Bouton 3
DEPTH/PITCH
Règle l’intensité de l’effet./Règle l’im-
portance du changement de hauteur.
Bouton 5 MIX/LEVEL Règle la quantité du son avec effet qui
se mélange au son direct./
Règle le niveau de sortie
CHO1PITCH ne peuvent pas être utilisés simultanément avec
l’effet Modulation. Si vous tentez d’utiliser un de ces effets dans
un programme pour lequel l’effet Modulation est activé, ce der-
nier sera automatiquement coupé.
F BACK 1 et 2 ne peuvent pas être utilisés simultanément avec
les effets Ambience ROOM1ARENA. Si vous tentez d’utili-
ser ces effets dans un programme où l’effet ROOM1ARENA
est activé, ce dernier sera automatiquement coupé.
DELAYHALL ne peuvent pas être utilisés en même temps que
l’effet Ambience. Si vous tentez d’utiliser ces effets dans un pro-
gramme où l’effet Ambience est activé, ce dernier sera automati-
quement coupé.
SAMPLE1LOOP2 ne peuvent pas être utilisés en même temps
que l’effet Modulation ni Ambience. Si vous tentez d’utiliser ces
effets SAMPLE1LOOP2 dans un programme où l’effet Mo-
dulation ou Ambience est activé, l’effet en question sera automa-
tiquement coupé.
VOLUME (Volume)
La pédale contrôle le volume. Le bouton 5 règle le niveau mini-
mum.
CHO1 (Chorus1)
La pédale contrôle l’intensité de modulation de hauteur de l’ef-
fet Chorus.
CHO2 (Chorus2)
La pédale contrôle la vitesse de modulation de hauteur de l’effet
Chorus.
VIBRATO (Vibrato)
La pédale contrôle la vitesse de modulation de hauteur de l’effet
Vibrato.
FLANGER (Flanger)
La pédale contrôle la bande passante (modulation) de l’effet
Flanger.
PHASER (Phaser)
La pédale contrôle la vitesse de modulation de phase de l’effet
Phaser.
TREMOLO (Trémolo)
La pédale contrôle la vitesse de modulation de volume de l’effet
trémolo.
PAN (Panoramique)
La pédale contrôle la vitesse à laquelle le son se déplace dans
l’image stéréo.
WAH (Wah)
La pédale contrôle la fréquence de l’effet Wah.
FILTER (Filtre à résonance)
La pédale contrôle la fréquence du filtre à résonance.
RING (Modulateur en anneau)
Cet effet génère un son rappelant le son d’une cloche et pour
lequel la pédale contrôle la hauteur. Pour obtenir un effet soigné,
utilisez l’élément le plus proche du manche. Baissez le bouton
de tonalité de la guitare et jouez aux alentours de la 12e frette.
PITCH (Pitch Shifter)
La pédale permet de régler l’intervalle Pitch Shift. Lorsque le
bouton 5 est réglée sur “0”, seul le signal original est audible.
Choisissez la valeur “5” pour obtenir un rapport égal. La valeur
10”, enfin, signifie que seul la version transposée est audible.
Feed Back
Pour cet effet, la pédale contrôle le vibrato appliqué à l’effet Lar-
sen. Jouez une note et enfoncez la pédale pour produire un effet
Larsen. Le Larsen disparaît dès que vous relevez la pédale. Le
bouton 3 règle la vitesse du vibrato.
Vous n’obtiendrez pas d’effet Larsen si vous avez assigné le type
OFF, ACOUSTIC ou CLASSIC COMP à l’effet Drive Amp
F BACK1 (Larsen 1)
Génère un effet Larsen de la hauteur de la note jouée.
F BACK2 (Larsen 2)
Génère un effet Larsen une octave plus haut que la note jouée.
DELAY (Delay)
La pédale contrôle le niveau d’entrée de l’effet Delay.
Vous pouvez régler le paramètre TIME de le bouton 2 en ap-
puyant 2 fois sur le commutateur TAP au tempo voulu.
ECHO (écho)
La pédale contrôle le temps de retard de l’effet Echo. Tout comme
dans le cas d’un écho à bande, changer le temps de retard en-
traîne un changement de hauteur. Le bouton 3 règle le retard
maximum.
ROOM (Reverb Room)
Cet effet simule la réverbération d’une petite pièce ou d’une ca-
bine de studio. La pédale contrôle le niveau de réverbération.
GARAGE (Reverb Garage)
Cet effet simule la réverbération d’une salle de taille moyenne
comme un garage. La pédale contrôle le niveau de réverbération.
HALL (Reverb Hall)
Cet effet simule la réverbération d’une salle de dimensions
moyenne ou d’une grande salle de concert. La pédale contrôle le
niveau de réverbération.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results