Korg AX100G manual

Korg AX100G
9.5 · 2
PDF manual
 · 68 pages
English
manualKorg AX100G
25

3. Edition

3. Edition

En modes Program et Effect Select, vous pouvez éditer
(ou modifier) chaque effet, régler le Noise Gate et le
niveau du programme, et changer le nom du pro-
gramme.
Durant l’édition, les icônes d’édition affichées à l’écran
multi-fonction et les diodes des touches d’effet corres-
pondantes clignotent.
Pour conserver les changements apportés aux effets, vous devez
effectuer l’opération “Program Write”. Si vous mettez l’AX100G
hors tension ou choisissez un autre effet sans mémoriser vos chan-
gements, ils seront perdus.
Icône d'éditionValeur du paramètreLe paramètre assigné au bouton déplacé

Edition des effets

Vous pouvez éditer directement l’effet Drive Amp en tournant
les boutons de valeur 1—5 ou le bouton Type. Inutile donc d’ap-
puyer sur le commutateur DRIVE·AMP. (Voyez “Fonction d’édi-
tion rapide pour l’effet Drive Amp” ci-dessous.)
Pour éditer d’autres effets, appuyez sur le commutateur de sé-
lection voulue afin d’activer le mode d’édition (la diode corres-
pondante clignote alors).

Fonction d’édition rapide pour l’effet Drive

Amp
Quand l’effet Drive Amp est activé, vous pouvez l’éditer en
resélectionnant l’effet en question avec le bouton Type et en mo-
difiant les paramètres à l’aide des boutons 1—5. Quand vous
manipulez les boutons 1—5, l’écran multi-fonction affiche le nom
et la valeur de l’effet ou du paramètre assigné à le bouton en
question.
Vous pouvez utiliser le bouton Type pour modifier l’effet Drive
Amp même quand un autre effet comme Modulation ou Pedal
est en mode d’édition.
Il n’est pas possible d’éditer les paramètres tant que les boutons
ont d’autres fonctions ou tant que vous vous trouvez en mode
Bypass, Mute ou Phrase Trainer.
Régler le canal Drive Amp
Pour chaque programme, l’effet Drive Amp propose des régla-
ges de saturation pour deux canaux différents: A et B.
Choisissez le canal Drive Amp à éditer en appuyant sur le com-
mutateur DRIVE·AMP située sur la droite du panneau avant.
Chaque fois que vous enfoncez cette touche, sa diode change de
couleur: vert indique le canal A et rouge le canal B.

Exemple d’édition de l’effet Drive Amp

L’exemple suivant montre comment régler le canal B de l’effet
Drive Amp sur TUBE OD.
1. Appuyez sur le commutateur DRIVE·AMP pour choisir le
canal B (la diode doit être rouge).
2. Si l’écran multi-fonction affiche “TUBE OD”, aucun change-
ment n’est nécessaire. Si ce n’est pas le cas, tournez le bouton
Type sur la position TUBE OD. Si le bouton se trouvait déjà
sur cette position, tournez-la sur un autre type d’effet puis à
nouveau sur TUBE OD.
3. La diode à côté de le commutateur DRIVE·AMP se met à cli-
gnoter, indiquant que l’effet est choisi pour l’édition. (L’écran
multi-fonction affiche “TUBE OD” comme nom d’effet.) Si
vous choisissez l’effet programmé à l’origine, l’icône Original
apparaît à l’écran multi-fonction.
4. Les boutons 1—5 sont assignées respectivement aux paramè-
tres GAIN, TREBLE, MIDDLE, BASS et LEVEL et servent à
régler la valeur de ces paramètres. (Voyez “Paramètres d’ef-
fets” à la p.28.)
5. Quand vous tournez les boutons 1—5, le son change et l’écran
multi-fonction affiche le nom et la valeur du paramètre assi-
gné à le bouton en question. Quand vous manipulez une bou-
ton et retrouvez la valeur originale (avant édition) du para-
mètre, l’écran multi-fonction affiche l’icône Original.
Paramètre
Valeur du paramètre
Canal A/BTouche DRIVE·AMP
Icône Original
Si vous ne souhaitez pas utiliser l’effet Drive Amp, vous pouvez
le contourner en choisissant la position OFF avec le bouton Type.
Dans ce cas, l’affichage multi-fonction indique “DRV OFF” et la
diode de le commutateur DRIVE·AMP s’éteint.

Manual

View the manual for the Korg AX100G here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Korg AX100G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Korg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Korg AX100G specifications

Below you will find the product specifications and the manual specifications of the Korg AX100G.

General
BrandKorg
ModelAX100G
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Korg AX100G below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my Korg AX100G to my amplifier?

To connect your AX100G to your amplifier, use a standard 1/4-inch instrument cable. Plug one end into the "OUTPUT" jack of the AX100G and the other end into the input jack of your amplifier. Ensure both devices are powered off before making the connection.

How do I change the effects on my Korg AX100G?

To change effects on your AX100G, press the "EFFECT SELECT" button. This will cycle through the available effect types. Once you have selected the desired effect, use the knobs to adjust the parameters to your preference.

What should I do if my Korg AX100G doesn't produce any sound?

If your AX100G isn't producing any sound, first ensure that all cables are securely connected. Check that the volume level on both the AX100G and your amplifier are turned up. Additionally, verify that the "Mute" function is not activated on the AX100G, as this will silence the output.

How can I save my customized settings on the Korg AX100G?

You can save your customized settings on the AX100G by pressing and holding the "STORE" button. Use the corresponding footswitches to select the desired memory slot, then release the "STORE" button. Your settings will be saved and can be recalled at any time.

My Korg AX100G seems to be malfunctioning. Is there a way to reset it to factory settings?

Yes, there is a way to reset your AX100G to its factory settings. With the unit powered off, press and hold the "EXIT" button while turning the power on. This will initiate a system reset, restoring all settings to their default values.

Is the manual of the Korg AX100G available in English?

Yes, the manual of the Korg AX100G is available in English .

Is your question not listed? Ask your question here

No results