KoreHealth Kore 2.0 manual

KoreHealth Kore 2.0
9.3 · 1
PDF manual
 · 1 page
English
manualKoreHealth Kore 2.0

INSTRUCTION MANUAL

FASTENING THE WRISTBAND:
The device sensors requires direct skin contact on your wrist
to get an accurate reading.
Hold Kore 2.0™ in place on the outside of your wrist.
Tighten the wristband until you feel it has a snug fit around
your wrist, but not so tight that it cuts off circulation, then
fasten the pin-and-tuck strap.
To remove the device, unpin the tuck strap.
1.
2.
3.
4.
CHARGING THE BATTERY:
Long press home button to turned on the device.
If the device cannot be turned on, it is possible that the
battery might be low. Please charge it on a 5V rated USB
power supply for up to 3-5 minutes. Please refer to the
charging instruction on page 2.
Download the KoreHealth App onto your iOS or Android
smartphone by scanning the QR codes on the next page,
or by searchingKoreHealth” in the App Store or
Google Play Store.
INSTALLING THE KOREHEALTH APP:
TO TURN ON KORE 2.0™:
01 02 04

TIPS FOR USE

If the Kore 2.0 screen does not light up immediately after being plugged
in properly, the battery may be completely drained. Let it charge for at
least 5 minutes. The screen should light back up within this time. If
Kore 2.0
still does not light up or charge after all these steps, please
contact customer support.
03
Device requirements: iOS 8.0 and above; Android 4.4 and above.
Android
iOS
CONNECTING KORE 2.0™ TO YOUR SMARTPHONE:
You will have to pair your Kore 2.0™ to your smartphone manually
the first time you use it. After that, it will connect automatically
anytime your device is within range. Your Kore 2.0™ can store
off-line data for up to 30 days before syncing with your smartphone.
Open the KoreHealth App on your smartphone.
Hold Kore 2.0™ near your smartphone and go to Device page,
click “Pair Device”.
Choose Bluetooth name corresponding with your device’s
unique serial number (ex. K2XXXXXX). You can check your
device's Bluetooth name in Settings.
Connection completed.
1.
2.
3.
4.
05
Attach the bottom of the watch to the
magnetic pogo pin charging dongle.
(See diagram to right)
1.
Kore 2.0
is equipped with a magnetic pogo
pin charging dongle.
To charge, plug the dongle into a 5V 1A
USB-A port (not included) or a wall socket with a USB
adapter. Make sure your power source is 5V. It might take
up to 3-5 minutes for the watch to be responsive.
2.
Allow Kore 2.0
to charge for up to 2 hours or until the
battery indicator on the home screen is full.
3.
When completely charged, remove the device from
charging dongle.
4.
Kore 2.0™ requires approximately 20 seconds to
get a heart rate or blood oxygen reading.
For optimal performance, it is recommended
to wear Kore 2.0on your left wrist.
TIPS FOR USE:
Sensors
V1
To keep Kore 2.0™ clean, wipe it down with
a damp cloth once a week or after physical
activities.
To maintain consistent sensor reading, it is
recommended to clean the sensor at the back
of the watch after use. Dirt, lotion, grease or
excessive water and sweat will affect sensor
performance.
Left Hand
Warning: This device is not a toy. Keep away from children and pets.
12. Consult your doctor before beginning or modifying any exercise program
using the Kore 2.0
, or if you have any preexisting condition.
13. Do not check call or other notifications, GPS, or other applications on
the product's display while driving or in other situations where distractions
could be hazardous. Always be aware of your surroundings when
exercising.
HRV
Tracks the variation in time between
each heartbeat.
120
EXCELLENT
ms
06 07 08 09
Kore 2.0™ is equipped with a glass touch screen and capacitive
Home button ( ) located at the bottom of the screen.
Short Press the Home button
( ) to return to previous screen.
Long Press the Home button
( ) for 3 seconds to return to the
Home screen.
USING KORE 2.0:
Swipe up down left and right on the screen through modes.
Short Press on screen/icon on screen to select.

TIPS FOR USE

The touch screen could be affected by conductive media such as water
from shower or rain. Make sure the button interface is clean and dry
when using.
HOME SCREEN
The home screen displays the time, day, date, weather, health
metrics data and other essential information.
To change the home screen display style, long press the home
screen for 3 seconds to open Cover Style Selection. Swipe left
and right to view cover design. Short press at the end to
confirm your selection.
To cycle through modes (ie. Health metrics data, workouts,
messages and more), scroll up and down.
Swipe left to enter function modes.

MODES

1.
2.
HEALTH METRICS DATA
Measures your daily steps, distance,
calories and activity minutes. Short
press Health Data to expand details.
WORKOUT
Measures your performance during specific
exercises. Swipe up and down to select workout
(Walk, Run, Cycling, Gym, Hiking, Basketball,
Soccer, Tennis, Yoga, Dance, Badminton). Select
Target Setting (Distance, Duration, Calories or
Open Goal) and begin workout.
BLOOD OXYGEN MONITOR
Measures oxygen levels in your blood.
bpm
99
HEART RATE MONITOR
Measures your heart rate in beats per
minute.
SpO2
Swipe up, down, left and right
on the screen through modes.
Short Press display
for selection.
Long Press 3 seconds.
Short Press the Home
button to return to
previous screen.
Long Press the Home
button for 3 seconds to
return to the Home screen.
10 11
SKIN TEMPERATURE
Tracks skin temperature measurement.
Friendly Reminder
The unit of measurement can be changed from °F to °C in your App.
The metal temperature sensor will need direct skin contact in order to
take an accurate reading. Water, sand or dirt between your wrist and
watch will result in inaccurate readings.
The skin temperature measurement can take up to 1 minute to
reach a stabilized measurement.
RELAX
Set timed goal to relax. The device will lead
you in a breathing exercise.
SLEEP
Measures your total sleep duration. It also
breaks down your sleep patterns.
TIME
Use timer and stop watch function.
NOTIFICATION
Views incoming messages from your smartphone.
Scroll to the left to view details. Notification alerts
SMS, Facebook
, Instagram, Twitter,
Messenger
, WhatsApp, Telegram,
Pinterest™, Snapchat, Gmail, Skype, Line,
VKClient, QQ and WeChat.
PHONE CALLS
View incoming calls from your smartphone.
Accept (to answer calls via smartphone) or
decline calls.
12
WEATHER
Displays local weather when connected to App.
1413
SETTINGS
Select setting options (Find phone, display, language
restart, power off, reset or about) by tapping on
desired feature. FCCID information is listed in About.
FEATURED STATUS
Access this section by swiping right on the
main screen. Adjust brightness, Raise to wake
and Do not disturb.
REMINDER
Set daily reminders to take medicine, drink water
or take a walk.
MUSIC
Control music from connected smartphone.
Note: Music control will only work when your Kore 2.0 is paired with a smartphone
and the KoreHealth App is running that device.
FACTORY RESET
In Settings you will find the RESET button.
This will prompt you to restore your Kore 2.0 to
its factory setting which will erase any existing
data and preferences.
Rise to wake – Kore 2.0’s screen will automatically turn on
when your hand is raised.
FEATURES VIA APP
Kore 2.0™ will vibrate when you receive a call or text message.
To activate this function, you will need to set it up in the App
under ‘Device’.
When you receive a call, Kore 2.0™ will vibrate. Long Press
the function button to decline the call.
Message alert (ie. Twitter™, Messenger™, Facebook™,
WhatsApp™, Hangout™, Skype™, WeChat™, QQ™ and
Line™.) needs to connect in “App” section.
Alarm function can only be used on the App.
Stand Up Reminder is adjustable from 30 – 180 minutes with
increments of 5 minutes.
You can link Kore 2.0™ data to Apple™ Health App.
Distance Units – adjust by going to App, ‘Device’ ‘General’.
Display Timeout – adjustable by 5-30 seconds with increments
of 5 seconds.
Heart Rate – you can set up auto heart rate monitoring every
hour.
Do Not Disturb – select a time frame where you can turn off
Kore 2.0
’s vibrations, light up feature, or information push.
24-hour Time Setting – adjust by going to App, ‘Device
‘General’.
SPECIFICATIONS:
Package Includes
Kore 2.0™, charging dongle,
wrist band, instruction manual
Screen Size 1.05in
Bluetooth Version 5.0
Water Resistant Rating IP67
Battery Type Lithium Polymer
Battery Capacity 130mAh
Charge Time 1.5 – 2 hours
Input 5V 300mA
15
LANGUAGE SETTINGS:
You can change the language settings directly on the
Kore 2.0
by selecting ‘Settings’ “Language” and cycle through
until you reach the languages. To change the language
settings through mobile App, go to ‘Device
‘General’ while connected to your Kore 2.0™.
Standard Edition 30538
• English • German • French
• Spanish • Portuguese
• English • Simplified Chinese
• Hindi
• Japanese
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution:
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measure
s:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s RF radiation exposure limits set forth for an
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
SKU: 30538 & 30755 FCC ID: 2AX4F-30538
Made in China
17 18 19
Having difficulties setting up your watch? We are here to help!
Please visit https://support.korehealthofficial.com or scan the
below QR codes for any urgent inquiries!
Support Contact
This device complies with RSS 210 of the Industry Canada Rules. Operation is
subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil
doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
This equipment complies with Canada radiation exposure limits set forth for
uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations définies
par le Canada pour des environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre
antenne ou un autre émetteur.
IC:27073-30538 HVIN: 30538
Canada ISED Statement
Trademark Attributions
Apple
, Android, iOS, Bluetooth, USB, Facebook,
Instagram
, Twitter, Messenger, Whatsapp, Telegram,
Pinterest
, Snapchat, Gmail, Skype, WeChat, Line,
VKClient
, QQ, and all other third party trademarks or logos mentioned
or used in this Manual or in the packaging of this product are owned by their
respective trademark owners. KORE 2.0
has no affiliation to, and is not
associated or sponsored by Apple Inc., Google LLC, or any of the owners of
the third party trademarks mentioned or used in the product’s website,
manual, or packaging. Rather, any usage of third-party names or products
logos are for illustrative purposes only. Should any trademark attribution
be missing, mistaken or erroneous, please contact us as soon as possible
at
https://support.korehealthofficial.com for rectification.
16
To prevent personal injury or damage to your Kore 2.0read the following
guidelines carefully to ensure proper usage:
1. Avoid exposing Kore 2.0to chemicals, sudden impact and extreme heat.
2. When cleaning Kore 2.0
, do not use harsh solvents such as alcohol,
benzine, acetone or thinner.
3. Do not attempt to disassemble Kore 2.0
or remove the battery.
4. If you feel any discomfort while wearing Kore 2.0
, loosen the wristband
and discontinue using.
5. This is not a medical grade diagnostic device.
6. Do not use in steamy environment such as sauna or hot spring. Not for
swimming or diving.

IMPORTANT SAFETY INFORMATION

7. Do not submerge the Kore 2.0™ in water or other liquids for prolonged
periods.
8. Do not use the Kore 2.0
if it feels warm or hot or the display is cracked.
9. Substances in the Kore 2.0
and its battery may harm the environment
or cause injury if handled and disposed of improperly. Do not dispose
of the Kore 2.0
in a fire.
10. Only charge Kore 2.0
with its authorized charging cable. Do not charge
the Kore 2.0
if it is wet, or wear the product while you are charging it.
11. Kore 2.0
and its charging cable may include magnetic material.
Magnets may interfere with pacemakers, defibrillators, or other medical
devices. Consult your physician and the manufacturer of your medical
device before using the Kore 2.0
to determine if this product is safe
for you.

View the manual for the KoreHealth Kore 2.0 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the KoreHealth Kore 2.0 or do you need help? Ask your question here

Need help?

Do you have a question about the KoreHealth and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 88
R
Roberta LarsonMarch 16, 2023

How do I measure my blood pressure.

S
S DohertyMarch 23, 2023

How to alter time on kore watch

C
Connie Parry April 21, 2023

How to change from activity mode to normal mode

M
Mary GrossApril 28, 2023

How do you reset the tie on your waTC\H/

1 comment
M
Mary GrossApril 28, 2023

meant time

S
SebastianMay 19, 2023

Been stuck on this screen for 3days now

Been stuck on this screen for 3days now
zoom-in
View photo
R
RogerNovember 19, 2023

Can KOREHEALTH watch be used without paying the $100 fee?

S
Sally LivingstonFebruary 19, 2024

Why did Kore Tracker stop recording sleep?

K
KAY HAARSMAMarch 11, 2024

Can i access the manual in a way that i can see the whole thing larger...still trying to work out how to set it up...

K
KAY HAARSMAMarch 11, 2024

i cant get my phone to scan the barcode...is this necessary

G
GladysSeptember 17, 2022

How get off army time

The KoreHealth Kore 2.0 is a smartwatch that offers a range of features for fitness and health tracking. With its sleek design and durable construction, it is built to withstand everyday use. The watch is equipped with a heart rate monitor, which allows users to monitor their heart rate during exercise or throughout the day. Additionally, it has a built-in accelerometer that can track steps taken, calories burned, and distance traveled. The Kore 2.0 also includes a sleep tracking feature that monitors sleep patterns and provides insights into sleep quality. It has a long battery life, ensuring that users can wear it throughout the day without needing to constantly recharge. One of the standout features of the Kore 2.0 is its water resistance, allowing users to wear it while swimming or in rainy weather without worrying about damage. The watch also offers smartphone connectivity, enabling users to receive notifications for calls, messages, and social media alerts directly on their wrist. The Kore 2.0 has a user-friendly interface and is compatible with both Android and iOS devices. It comes with a variety of customizable watch faces, allowing users to personalize their experience. Overall, the KoreHealth Kore 2.0 is a versatile and reliable smartwatch that provides a comprehensive range of health and fitness tracking features in a stylish and durable package.

General
BrandKoreHealth
ModelKore 2.0
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the KoreHealth Kore 2.0 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I pair my smartwatch KoreHealth Kore 2.0 with my smartphone?

To pair your Kore 2.0 with your smartphone, go to the settings menu on your smartwatch, select "Bluetooth," and then follow the prompts to pair with your smartphone.

How can I track my heart rate using the KoreHealth Kore 2.0?

To track your heart rate, open the Kore 2.0 app on your smartphone, go to the Heart Rate section, and select "Start." Place your finger on the heart rate sensor on the back of the smartwatch, and it will measure your heart rate in beats per minute (BPM).

Can I customize the watch face on the KoreHealth Kore 2.0?

Yes, you can customize the watch face on your Kore 2.0. Open the Kore 2.0 app on your smartphone, go to the Watch Face section, and choose from a variety of pre-installed watch faces or download new ones.

How can I track my steps and distance using the KoreHealth Kore 2.0?

To track your steps and distance, open the Kore 2.0 app on your smartphone, go to the Activity section, and select "Start." The smartwatch will use its built-in accelerometer to track your steps and estimate the distance covered.

What are some recommended exercises for which I can use the KoreHealth Kore 2.0?

The Kore 2.0 is suitable for various exercises, including running, walking, cycling, elliptical training, and weightlifting. For each exercise, open the Kore 2.0 app on your smartphone, go to the Workout section, and select the corresponding exercise mode for accurate tracking and metrics.

Is the manual of the KoreHealth Kore 2.0 available in English?

Yes, the manual of the KoreHealth Kore 2.0 is available in English .

Is your question not listed? Ask your question here

No results