View the manual for the Konig SEC-IPCAM100 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Konig SEC-IPCAM100 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Konig SEC-IPCAM100.
The Konig SEC-IPCAM100 is a cube-shaped IP security camera designed to keep your property secure. With a maximum resolution of 640 x 480 pixels, this camera provides clear and detailed images. The minimum illumination of 1 lx ensures that even in low light conditions, the camera can still capture footage. The CMOS sensor type and 4x digital zoom further enhance the quality of the images. Equipped with night vision functionality, the Konig SEC-IPCAM100 can capture footage up to a distance of 10 meters in the dark. With security algorithms WEP, WPA, and WPA2, your data transmission is encrypted and secure. The camera is easy to install and works without the need for complex configuration, making it a convenient choice for home security. The free uCare Cam app allows you to watch live footage on your smartphone or other mobile devices from anywhere at any time. It also provides email or app notifications when motion is detected. The Konig SEC-IPCAM100 is not only a reliable security camera but can also be used as a baby monitor with its 2-way audio function. Overall, this security camera offers advanced features and functionality to help you monitor your property effectively.
| Brand | Konig |
| Model | SEC-IPCAM100 | SEC-IPCAM100B |
| Product | security camera |
| EAN | 5412810187393 |
| Language | English |
| Filetype | User manual (PDF) |
| Maximum resolution | 640 x 480 pixels |
| Supported video modes | - |
| Supported graphics resolutions | 160 x 120,320 x 240,640 x 480 (VGA) |
| Minimum illumination | 1 lx |
| 39.3 ° | |
| 26.8 ° |
| Sensor type | CMOS |
| Optical zoom | - x |
| Digital zoom | 4 x |
| Security algorithms | WEP, WPA, WPA2 |
| Built-in HDD | No |
| Card reader integrated | Yes |
| Compatible memory cards | SDHC |
| Flash memory | 8 MB |
| Night vision | Yes |
| Night vision distance | 10 m |
| Form factor | Cube |
| Product color | Black |
| Type | IP security camera |
| PTZ control | - |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Ethernet LAN | No |
| Wi-Fi | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Supported network protocols | IPV4, ARP, TCP, UDP, ICMP, DHCP Client, NTP Client, DNS Client, SMTP Client, P2P Transmission |
| Other operating systems supported | Android |
| Width | 88 mm |
| Depth | 46 mm |
| Height | 116 mm |
| Weight | 119 g |
| Power over Ethernet (PoE) | No |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 2.3 W |
| DC output current | 1 A |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -20 - 70 °C |
| Microphone in | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Konig SEC-IPCAM100 below.
The Konig SEC-IPCAM100 has a weight of 119 g.
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
MP stands for MegaPixels.
The Konig SEC-IPCAM100 has a height of 116 mm.
The Konig SEC-IPCAM100 has a width of 88 mm.
The Konig SEC-IPCAM100 has a depth of 46 mm.
Yes, the Konig SEC-IPCAM100 has a maximum resolution of 640 x 480 pixels. This resolution is standard for indoor security cameras in this price range.
The Konig SEC-IPCAM100 has a minimum illumination of 1 lx, which means it can capture clear images even in low light conditions compared to other security cameras with higher illumination requirements.
Yes, the Konig SEC-IPCAM100 has night vision capability with a distance of 10 m. This is a useful feature for indoor security cameras to monitor spaces in the dark.
The Konig SEC-IPCAM100 has a 4x digital zoom, which allows users to zoom in on specific areas for better detail or surveillance compared to cameras with lower zoom capabilities.
Yes, the Konig SEC-IPCAM100 supports security algorithms like WEP, WPA, and WPA2 for secure data transmission. This is important for protecting the camera feed from potential hackers or unauthorized access.
To troubleshoot if the Konig SEC-IPCAM100 security camera is not connecting to your device or router, follow these steps: 1. Press the WPS button on your IP camera. Wait until the status LED flashes between red and green. 2. Press and hold the WPS/RESET button on your IP camera for about 2 seconds to enter WPS mode. The status LED will start flashing green. 3. Enter WPS mode on your Wi-Fi router by pressing the WPS button. 4. Select the Wi-Fi router of your choice on the screen. 5. Wait for about 1-2 minutes. If the IP camera successfully connects to the Wi-Fi router, the status LED will turn orange. 6. If the setup is not successful, go back to Step 1 and try again. 7. Once connected, enter a camera name and password for security. 8. The IP camera will automatically enter the viewing screen. If you prefer to set up the IP camera using the uCare Cam app, follow these steps: 1. Open the "Settings" on your iOS device and select "Wi-Fi". Connect to the network named "Wi-Fi-cam-p2p". 2. Open the "uCare Cam" app and select the "Wi-Fi Connect" tab. 3. Choose "Router mode" and enter the SSID and password of your home router. 4. Wait for the IP camera to restart and connect to your Wi-Fi router. The status LED will turn orange when successfully connected. 5. Select the camera name in the "uCare Cam" app to connect. If your Wi-Fi router has a WPS button, you can also use it to set up the IP camera. Just make sure to enable WPA/WPA2 encryption in your router settings. Please note that these troubleshooting steps are specific to the Konig SEC-IPCAM100 security camera.
If you are experiencing issues with installing the uCare Cam app on your Android or iOS device for the Konig SEC-IPCAM100 security camera, follow these steps: 1. Make sure your device meets the system requirements. The app requires Android 4.0 and up or iOS 5.0 and up. 2. On your Android device, download the "uCare Cam" app from the Google Play Store. On your iOS device, download the app from the Apple App Store. 3. After the app installation is complete, click on the app icon to run it. 4. The default password for the "uCare Cam" app is 0000. Enter this password when prompted. 5. Open the app and select the option to add a new camera. On an Android device, select the "+" sign on the top right of the screen. On an iOS device, select the "Scan camera QR code" option. 6. If using an iOS device, make sure you have a QR code scanner installed. Scan the QR code located on the back of the IP camera. 7. After scanning the QR code, the UID (Unique ID code) will appear. Enter a personal camera name and select "DONE" on the top right of the screen. For more detailed information about the app, IP camera, and frequently asked questions, please refer to the full manual provided with the product.
Yes, the manual of the Konig SEC-IPCAM100 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Konig and is the answer not in the manual?
Question and answer
Number of questions: 0