View the manual for the Kodak EP101WG here, for free. This manual comes under the category security cameras and has been rated by 4 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Kodak EP101WG or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Kodak EP101WG.
| Brand | Kodak |
| Model | EP101WG | EP101WG |
| Product | security camera |
| EAN | 0659436403031, 3760285860238 |
| Language | English |
| Filetype | User manual (PDF) |
| Type | IP security camera |
| Placement supported | Indoor & outdoor |
| PTZ control | Yes |
| Day/night mode | Yes |
| Remote viewing | Yes |
| Antenna type | External |
| Detachable antenna(s) | Yes |
| Antennas quantity | 1 |
| Infrared (IR) cut-off filter | Yes |
| Plug and Play | Yes |
| Preset points | Yes |
| Connectivity technology | Wired & Wireless |
| Form factor | Dome |
| Product color | Black, White |
| Mounting type | Ceiling/wall |
| Protection features | Waterproof |
| International Protection (IP) code | IP66 |
| Weatherproof | Yes |
| Maximum resolution | 1920 x 1080 pixels |
| Total megapixels | 2 MP |
| Video compression formats | H.264 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Supported video modes | 1080p |
| Frame rate | 30 fps |
| Full HD | Yes |
| Camera pan control | Yes |
| Camera tilt control | Yes |
| Minimum illumination | - lx |
| 85 ° | |
| 45 ° | |
| Tilt angle range | 0 - 90 ° |
| Pan range | 0 - 270 ° |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/2.7 " |
| Number of lenses | - |
| Alert notification type | |
| Motion sensor | Yes |
| Security algorithms | 128-bit AES, TKIP, WEP, WPA, WPA2 |
| Card reader integrated | Yes |
| Compatible memory cards | MicroSD (TransFlash) |
| Built-in HDD | No |
| Maximum memory card size | 128 GB |
| Night vision | Yes |
| Night vision distance | 8 m |
| LED type | IR |
| Number of illumination LEDs | 12 |
| Infra-red wavelength | 850 nm |
| Ethernet LAN | Yes |
| Wi-Fi | Yes |
| Bluetooth | No |
| Ethernet interface type | Fast Ethernet |
| Cabling technology | 10/100Base-T(X) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Frequency band | 2.4 GHz |
| Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Interface | RJ-45/WLAN |
| Built-in microphone | Yes |
| Power source type | - |
| Web-based management | Yes |
| Firmware upgradeable | Yes |
| Remotely operated | Yes |
| Number of cameras | 1 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kodak EP101WG below.
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
MP stands for MegaPixels.
Yes, the Kodak EP101WG does have PTZ control, allowing the user to pan, tilt, and zoom the camera for a better view of their surroundings. This feature makes it more versatile compared to cameras without PTZ control.
Yes, the Kodak EP101WG is suitable for both indoor and outdoor use, thanks to its waterproof and weatherproof design. This means users can place it outside without worrying about damage from the elements.
Yes, the Kodak EP101WG does have remote viewing capabilities, allowing users to access the camera feed from anywhere using a smartphone or computer. This feature adds convenience and accessibility for users.
Yes, the Kodak EP101WG features Plug and Play functionality, making it easy to install and set up without the need for complicated configurations. This user-friendly feature makes it a good choice for those looking for a simple security camera solution.
The Kodak EP101WG has an IP66 rating, meaning it is protected against dust and powerful water jets. This high level of protection ensures the camera can withstand various environmental conditions, making it a durable and reliable choice for outdoor use.
To troubleshoot Ethernet installation issues with your Kodak EP101WG security camera, follow these steps: 1. Download and install the free KODAK Security app on your phone. 2. Plug in the camera and reset it (wait 60 seconds). 3. Tap on the addition symbol and select "Wifi cameras." 4. Choose "For an existing camera" and scan the camera's QR Code. 5. Name your camera and enter the default security code "123456." 6. Access advanced settings by clicking on the settings wheel. 7. Navigate to the WIFI settings in the basic settings. 8. Select your Wi-Fi network and enter the corresponding password. 9. Unplug the Ethernet cable to switch the camera to the WIFI network.
To troubleshoot connecting your Kodak EP101WG security camera to a Wi-Fi network, follow these steps: 1. Check that your internet box is set to 2.4GHz (5GHz off) and ensure your Wi-Fi security key is no longer than 21 characters and is in WPA (not WEP). 2. Download and install the free KODAK Security app on your phone. 3. Plug in the camera and reset it (wait 60 seconds). 4. Open the app and press "+" to connect your camera to your Wi-Fi network. 5. Follow the app's instructions to select your Wi-Fi network, enter the password, and complete the setup process. 6. Change the camera's password when prompted and remember it. 7. Wait for the camera to appear connected in the app's camera list. 8. Enjoy live video by tapping "Live View."
To troubleshoot accessing advanced settings and basic settings through the app for your Kodak EP101WG security camera, follow these steps: 1. Refresh the connection with the servers. 2. Enable and enter a PIN for Setup Pin Lock to protect access to your application and camera viewing. 3. Activate or deactivate notifications. 4. Enable video hardware acceleration for optimal video quality. 5. Check the version number in the "About" section. 6. Tap the camera icon at the bottom of the screen, then select the camera you want to configure. 7. Access advanced settings by tapping the admin password (default password is 123456). 8. In the Advanced Settings menu, you can change the admin password, modify the security code, and configure accessories like door sensors and motion sensors for a complete alarm system.
Yes, the manual of the Kodak EP101WG is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Kodak and is the answer not in the manual?
Question and answer
Number of questions: 0