Klipsch S1 True Wireless manual

Klipsch S1 True Wireless
9 · 1
PDF manual
 · 4 pages
manualKlipsch S1 True Wireless


1. Turn on the earphones by holding down the touch buttons (over the logo) on
both earphones for 3 seconds.
2. Once they are turned on you will hear a prompt indicating that the Left and the
Right Channels have been connected to each other.
3. Now it is time to pair them to your phone. Open up the Bluetooth connection
menu of your smartphone or tablet. Connect to “S1” or “Klipsch S1 True
Wireless”. If it does not connect right away wait 5 seconds and try again.
4. Once connected the earphones will recognize your device and will
automatically connect to it every time they are powered on in the future.
There are 2 ways to power on the earphones:
1. If they are in the charging case simply remove the earphones without touching
the touch buttons to auto power on the earphones.
2. If they are not in the charging case or the case has run of power, press the
touch buttons on both earphones for 3 seconds to power on.
There are 2 ways to power off the earphones:
1. To auto power off place the earphones back into the charging case. After 5
seconds the earphones will automatically turn off and begin the charging
process. These features may not work if the charging case has been fully
depleted of power.
2. To manually power off press and hold the touch button over the logo of the
earphone for 3-5 seconds.
1. To charge the earphones simply place them into the corresponding areas of the
charging case. Make sure they are securely in the correct position.
2. Close the lid.
3. The red indicator lights will turn on to indicate that they are charging. When
charging is complete the red lights will turn off. The blue indicator lights on the
charging case show the current power level remaining in the charging case.
1. To charge the power case plug in the included micro USB cable to the rear of the
case. Then plug the other end into a power source such as a computer or a USB
wall charger.
2. Charging is complete when all 4 LED lights are solid blue.
3. This is also compatible with wireless charging.
4. Simply place the charging case with the Klipsch brand facing upward on to a
powered wireless charging pad and charging will automatically begin.



View the manual for the Klipsch S1 True Wireless here, for free. This manual comes under the category headphones and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Klipsch S1 True Wireless or do you need help? Ask your question here

Need help?

Do you have a question about the Klipsch and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Klipsch owners to provide you with a good answer.

Van Anderson • 22-1-2023No comments

Need operating manual.

Answer this question
Van Anderson • 22-1-2023No comments

how do I increase the volume

Answer this question
Ron Britt • 8-10-2021No comments

Can’t get my pair to work together

Answer this question

Number of questions: 3

S1 True Wireless
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Klipsch S1 True Wireless below.

Is your question not listed? Ask your question here

No results