Klipsch Reference Premiere RP-6000F manual

Klipsch Reference Premiere RP-6000F
8.4 · 1
PDF manual
 · 68 pages
English
manualKlipsch Reference Premiere RP-6000F
FREQUENCY RESPONSE 34-25kHz +/- 3dB
SENSITIVITY 97dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 125W/500W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 1800Hz
HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid
Cross-Section Tractrix
®
Horn
LOW FREQUENCY DRIVER Dual 6.5” Cerametallic Cone Woofers
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass Reex via rear-ring Tractrix
®
Port
INPUTS Dual binding posts / bi-wire / bi-amp
HEIGHT 39.62” (100.6 cm)
WIDTH 9.35” (23.7 cm)
DEPTH 17.02” (43.2 cm)
WEIGHT 49 lb (22.2 kg)
FINISH Ebony, Walnut, Piano Black
BUILT FROM 2018

RP-6000F

SPECIFICATIONS

90° x 90° SILICON COMPOSITE HYBRID TRACTRIX

®

HORN

Horn loading maximizes efciently and increases detail while focusing high
frequencies towards the listening area. Proprietary Tractrix
®
geometry provides the
most efcient transfer of high frequency waves into the listening area. The phase
plug and compressed molded silicon face ensure smooth frequency response. When
combined, the cleanest, most natural sound possible is created.
LINEAR TRAVEL SUSPENSION (LTS) TITANIUM DIAPHRAGM TWEETER
The exclusive Linear Travel Suspension minimizes distortion for enhanced, detailed
performance. LTS tweeters are a hallmark of previous Reference lines, making it a
core component of some of the best speakers in the world.

VENTED TWEETER DESIGN

The new vented tweeter housing reduces standing waves that create unwanted
harmonics, resulting in enhanced detail and clarity in high frequency reproduction.

SPUN COPPER CERAMETALLIC WOOFERS

A signature feature on the Reference Premiere series, Cerametallic™ woofers are
exceptionally rigid and lightweight for minimal distortion and maximum efciency.
When paired with the Tractrix horn-loaded LTS tweeter, it provides the highest
speaker efciency in its class.

TRACTRIX PORTS

Utilizing Tractrix geometry, the Reference Premiere ports allow for the most
efcient, fastest air transfer from the cabinet, which reduces port noise for punchier
low frequencies. Klipsch Tractrix ports have custom designed inner ares that help
reduce air turbulence entering the port. Less turbulent air helps reduce port noise
for cleaner, more powerful bass.

BI-WIRING / BI-AMPING CAPABILITY

Dual input terminals for bi-wiring / bi-amping capabilities. Bi-wiring separates high
and low frequency current into separate speaker cables, reducing intermodulation
distortion, for clearer midrange. Bi-amping allows for customization using outboard
crossovers when using separate ampliers.

FURNITURE GRADE MATERIALS AND FINISHES

Finishes include ebony vinyl, walnut vinyl and piano gloss. Ebony and walnut models
boast satin painted bafes with a scratch resistant nish, while the premium piano
gloss cabinet is hand-sanded for a clear, mirror-like nish. The mirror-life piano gloss
nish is seamless due to the meticulous hand sanded and hand polished process.

CAST ALUMINUM FEET

Provides a more modern look with less resonance than MDF or ABS plastic. It is
mechanically designed to minimize surface area in contact with oor, decoupling the
speaker for faster, tighter low frequencies and more detail.

STRONG, FLEXIBLE, REMOVABLE GRILLE

Attaches magnetically for an elegant transition from powerful showstopper to
discrete performance piece.

DRAMATIC DETAILS

Copper anodized trim rings, cast aluminum feet, satin painted bafes and a
laser etched logo treatment give the Reference Premiere II series a modern,
premium look.
RP-6000F SPEC SHEET | V01 | 180703
All specications are subject to change without notice. ©2018 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation.
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
1
OF 1

Manual

View the manual for the Klipsch Reference Premiere RP-6000F here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Klipsch Reference Premiere RP-6000F or do you need help? Ask your question here

Need help?

Do you have a question about the Klipsch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Klipsch Reference Premiere RP-6000F specifications

Below you will find the product specifications and the manual specifications of the Klipsch Reference Premiere RP-6000F.

The Klipsch Reference Premiere RP-6000F is a floor speaker designed to provide high-quality audio. With a power source type of AC, this speaker requires a power outlet to function. It has an RMS rated power of 125 W, making it capable of delivering a strong and clear sound. Featuring a peak music power output (PMPO) of 500 W, this speaker has the ability to produce impressive audio output when required. The impedance of 8 Ω ensures compatibility with a wide range of audio devices, allowing for flexible connectivity options. With a sensitivity of 97 dB, the Klipsch Reference Premiere RP-6000F can efficiently convert input signals into sound, resulting in a loud and immersive listening experience. The crossover frequency of 1800 Hz helps to separate and distribute audio frequencies effectively, ensuring balanced and accurate sound reproduction. Measuring at 1006 mm in height, 237 mm in width, and 432 mm in depth, this speaker is suitable for floor placement, making it an ideal choice for home entertainment setups. Weighing 22200 g, it is a robust and sturdy speaker that can withstand regular use. In summary, the Klipsch Reference Premiere RP-6000F is a floor speaker with a power output of 125 W, a sensitivity of 97 dB, and an impedance of 8 Ω. Its design allows for optimal audio performance, and its dimensions and weight make it suitable for floor placement. With its reliable construction, this speaker promises durability and longevity for enhanced listening pleasure.

General
BrandKlipsch
ModelReference Premiere RP-6000F | 1065799
Productspeaker
EAN0743878035643
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Loudspeakers
Speaker type-
Audio output channels- channels
Speaker placementFloor
Number of drivers-
Power
Power source typeAC
Audio
RMS rated power125 W
Peak Music Power Output (PMPO)500 W
Impedance8 Ω
Frequency range34 - 25000 Hz
Sensitivity97 dB
Crossover frequency1800 Hz
Weight & dimensions
Height1006 mm
Width237 mm
Depth432 mm
Weight22200 g
Performance
Product colorBlack
Recommended usageHome
Amplifier
Amplifier-
Ports & interfaces
Connectivity technologyWired
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Klipsch Reference Premiere RP-6000F below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the Klipsch Reference Premiere RP-6000F?

The Klipsch Reference Premiere RP-6000F has a weight of 22200 g.

What is the height of the Klipsch Reference Premiere RP-6000F?

The Klipsch Reference Premiere RP-6000F has a height of 1006 mm.

What is the width of the Klipsch Reference Premiere RP-6000F?

The Klipsch Reference Premiere RP-6000F has a width of 237 mm.

What is the depth of the Klipsch Reference Premiere RP-6000F?

The Klipsch Reference Premiere RP-6000F has a depth of 432 mm.

Why is there no sound coming from my Klipsch Reference Premiere RP-6000F speakers?

Check if the speaker cables are properly connected to the audio source and ensure the speaker's power switch is turned on. Also, confirm that the audio source is functional and the volume is not muted or set too low.

How can I adjust the bass and treble levels on my Klipsch Reference Premiere RP-6000F speakers?

The Klipsch Reference Premiere RP-6000F speakers do not have built-in bass and treble adjustment controls. We recommend utilizing an equalizer or the tone controls on your audio source to adjust the desired sound frequencies.

What is the recommended power amplifier or receiver wattage for the Klipsch Reference Premiere RP-6000F speakers?

The Klipsch Reference Premiere RP-6000F speakers are recommended to be paired with an amplifier or receiver that can deliver between 125 to 400 Watts per channel to ensure optimal performance.

How do I properly clean and maintain my Klipsch Reference Premiere RP-6000F speakers?

To clean your speakers, use a soft, dry cloth to gently wipe the speaker cabinets and grilles. Avoid using any cleaning agents or solvents as they may damage the speakers' finish. Regularly check and remove any accumulated dust or debris from the speaker drivers and vents using a soft brush or compressed air.

Can I bi-wire or bi-amp my Klipsch Reference Premiere RP-6000F speakers and how?

Yes, the Klipsch Reference Premiere RP-6000F speakers have bi-wire and bi-amp capabilities. To utilize this feature, you will need two separate amplifiers or receiver channels. Connect one set of speaker cables to the high-frequency terminals and the other set to the low-frequency terminals on the speaker's binding posts. Ensure proper polarity and make sure both amplifiers or receiver channels are synchronized for simultaneous audio playback.

Is Klipsch Reference Premiere RP-6000F a floor speaker?

Yes, Klipsch Reference Premiere RP-6000F is a floor speaker. This means that it is designed to be placed on the floor, providing a powerful and immersive audio experience.

Does Klipsch Reference Premiere RP-6000F require an AC power source?

Yes, Klipsch Reference Premiere RP-6000F requires an AC power source. This means that it needs to be plugged into a power outlet to function.

What is the RMS rated power of Klipsch Reference Premiere RP-6000F?

The RMS rated power of Klipsch Reference Premiere RP-6000F is 125 W. This indicates the continuous power that the speaker can handle, allowing for clear and loud audio output.

What is the peak music power output (PMPO) of Klipsch Reference Premiere RP-6000F?

The peak music power output (PMPO) of Klipsch Reference Premiere RP-6000F is 500 W. This represents the maximum power output that the speaker can handle for short bursts, resulting in dynamic and impactful sound.

What is the impedance of Klipsch Reference Premiere RP-6000F?

The impedance of Klipsch Reference Premiere RP-6000F is 8 Ω. This indicates the electrical resistance of the speaker and is compatible with most audio receivers and amplifiers. The lower the impedance, the higher the power output potential of the speaker.

Is the manual of the Klipsch Reference Premiere RP-6000F available in English?

Yes, the manual of the Klipsch Reference Premiere RP-6000F is available in English .

Is your question not listed? Ask your question here

No results