View the manual for the Klarstein TurboHybrid Vacuum Cleaner here, for free. This manual comes under the category vacuum cleaners and has been rated by 2 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Klarstein TurboHybrid Vacuum Cleaner or do you need help? Ask your question here
| Brand | Klarstein |
| Model | TurboHybrid Vacuum Cleaner |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Klarstein TurboHybrid Vacuum Cleaner below.
Your Klarstein vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
To turn on the Klarstein TurboHybrid Vacuum Cleaner, follow these steps: 1. Locate the power button on the handle of the vacuum cleaner. 2. Press the power button to turn on the main unit of the vacuum cleaner. 3. If you want to use the handheld part of the vacuum cleaner, locate the power button on the handheld unit. 4. Press the power button on the handheld unit to turn it on. Please note that the specific location of the power buttons may vary slightly depending on the model and design of the vacuum cleaner. Refer to the user manual for the exact location of the power buttons if you are unsure. Remember to ensure that the vacuum cleaner is properly charged or connected to a power source before attempting to turn it on.
To detach the handheld part of the Klarstein TurboHybrid Vacuum Cleaner, follow these steps: 1. Locate the unlock button on the main unit of the vacuum cleaner. 2. Press and hold the unlock button to release the handheld part from the main unit. 3. Once the handheld part is released, gently pull it away from the main unit to detach it completely. 4. If necessary, you can attach different accessories or nozzles to the handheld part for specific cleaning tasks. 5. To reattach the handheld part, align it with the connection point on the main unit and push it firmly until it clicks into place. 6. Ensure that the handheld part is securely attached before using the vacuum cleaner. Remember to handle the handheld part with care when detaching or attaching it to avoid any damage. If you have any difficulties or questions, refer to the user manual for more detailed instructions and illustrations.
To empty the dust container of the Klarstein TurboHybrid Vacuum Cleaner, follow these steps: 1. Locate the release button on the vacuum cleaner. 2. Press the release button to remove the whole dust container from the vacuum cleaner. 3. Take out the filters from the dust container. 4. Empty the contents of the dust container into a dust bin or trash properly. 5. If necessary, you can rinse the filters with warm water. Make sure the filters are completely dry before reassembling them. 6. Once the dust container is empty and the filters are clean and dry, place the dust container back into the vacuum cleaner. Regularly cleaning the dust container and filters after each use is important for optimal performance and to eliminate unpleasant odors. Refer to the user manual for more detailed instructions and illustrations if needed. Please note that the specific steps may vary slightly depending on the model and design of the vacuum cleaner.
To clean the electric brush of the Klarstein TurboHybrid Vacuum Cleaner, follow these steps: 1. Turn off the vacuum cleaner and unplug it from the power source. 2. Remove the electric brush from the vacuum cleaner by carefully pulling it out of the vacuum compartment. 3. Check the brush for any tangled hair, fibers, or debris. Use your fingers or a pair of scissors to carefully remove any obstructions. 4. If the brush is detachable, remove it from the brush housing by following the instructions in the manual. 5. Clean the brush bristles using a soft brush or cloth to remove any remaining dirt or debris. 6. If the brush is washable, rinse it under running water and gently scrub it with mild soap if necessary. Make sure to thoroughly dry the brush before reassembling it. 7. Reattach the electric brush to the vacuum cleaner by carefully inserting it back into the vacuum compartment. 8. Ensure that the brush is securely in place before using the vacuum cleaner again. Regularly cleaning the electric brush will help maintain its performance and prevent clogging. Refer to the user manual for more detailed instructions and illustrations if needed.
To charge the Klarstein TurboHybrid Vacuum Cleaner, follow these steps: 1. Locate the charging station that comes with the vacuum cleaner. 2. Ensure that the charging station is plugged into a power outlet. 3. Place the vacuum cleaner onto the charging station, ensuring that the charging contacts on the vacuum cleaner align with the charging contacts on the station. 4. The charging indicator light on the vacuum cleaner or the charging station should illuminate to indicate that the vacuum cleaner is charging. 5. Allow the vacuum cleaner to charge for the recommended amount of time specified in the manual. This may vary depending on the model and battery capacity. 6. Once the vacuum cleaner is fully charged, the charging indicator light should turn off or change color to indicate a full charge. 7. Remove the vacuum cleaner from the charging station and unplug the charging station from the power outlet. It is important to regularly charge the vacuum cleaner to ensure optimal performance and battery life. Refer to the user manual for more detailed instructions and illustrations if needed.
Yes, the manual of the Klarstein TurboHybrid Vacuum Cleaner is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Klarstein and is the answer not in the manual?
Question and answer
Number of questions: 2After a few seconds of being on it shuts off but only when it’s a vacuumed not when being used as a hand held vacuum
My vacuum won't turn off