View the manual for the KitchenAid KRSC703HPS here, for free. This manual comes under the category refrigerators and has been rated by 2 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the KitchenAid KRSC703HPS or do you need help? Ask your question here

The KitchenAid KRSC703HPS is a refrigeration appliance that is designed to provide efficient cooling and storage. This refrigerator has a large capacity and is equipped with adjustable shelves that can be customized to fit different types of food items. The exterior of the refrigerator is made of high-quality materials that are durable and easy to clean. This kitchen appliance features a dual cooling system that helps to maintain the freshness of your food. It also has a temperature management system that ensures that the temperature inside the refrigerator remains consistent. The LED lighting provides bright and energy-efficient illumination that makes it easy to see your food items. The KitchenAid KRSC703HPS has a sleek and modern design that will complement any kitchen decor. It has a stainless steel finish that resists fingerprints and smudges. The door is equipped with an ice and water dispenser that provides clean and filtered water and ice. This refrigerator is Energy Star certified, meaning that it is energy-efficient and can help you save on your energy bills. It also has a Sabbath mode that allows you to disable certain features during the Sabbath and holidays. The KitchenAid KRSC703HPS is a top-of-the-line refrigeration appliance that provides reliable and efficient cooling and storage for your food.
| Brand | KitchenAid |
| Model | KRSC703HPS |
| Product | refrigerator |
| Language | English |
| Filetype | User manual (PDF), Installation Guide (PDF), Instructions / Assembly (PDF), Quickstart Guide (PDF), Warranty information (PDF), Energy label (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the KitchenAid KRSC703HPS below.
There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?
A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.
A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
There could be a few potential causes for this issue. First, make sure that the temperature settings are adjusted correctly. Additionally, check if the condenser coils are dirty or blocked, as this can impede proper cooling. Lastly, ensure that the door is sealing tightly, as a loose seal can lead to temperature fluctuations.
Unusual noises can often indicate a problem with the refrigerator. Check if the unit is properly leveled, as an uneven surface can cause rattling or buzzing sounds. Additionally, make sure that the fan is not obstructed, as this can lead to loud noises. If the issue persists, it might be worth contacting a technician to inspect the unit further.
If the ice maker is not producing ice, first check if the water supply line is connected and turned on. Ensure that the freezer temperature is set to an appropriate level, ideally at or below 0 degrees Celsius. Also, make sure that the ice maker is not jammed, as this can prevent ice production. If these steps do not resolve the issue, consider seeking professional assistance.
Condensation on the outside of the fridge can occur due to excess moisture in the air or if the door seal is not functioning properly. Verify that the door is closing tightly and the seals are clean and undamaged. Additionally, ensure that the room humidity is within a suitable range to prevent excessive moisture buildup.
If the water dispenser is not working, start by checking if the water supply valve is fully open and the water line is correctly connected. Also, examine the water filter and replace it if necessary. If the problem persists, inspect the dispenser control panel for any error codes and consult the manual for further troubleshooting steps.
Yes, the manual of the KitchenAid KRSC703HPS is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the KitchenAid and is the answer not in the manual?
Question and answer
Number of questions: 51Water is leaking from under the plastic vented area. Also I’m confused by the hole in the bottom. Why is this here. Where does it go?
1 comment
Water leaking from underneath the plastic vented area and the presence of a hole in the bottom of the KitchenAid KRSC703HPS refrigerator may indicate a potential problem with the water connection or a clogged water filter. Follow these steps to address these concerns: 1. Check the water tubing and wiring connections. Make sure the water tubing is properly connected to the blue and green fittings. If necessary, reconnect the tubing without intertwining it with the wiring bundles. 2. If the water connection style is different, such as using black water tubes with blue and red tips, ensure they are securely connected to the corresponding fittings. 3. Reinstall the P-clamp around the small wiring bundle and place it on the top screw hole of the routing plate. Make sure the large wiring bundle runs behind the right side of the routing plate, below the small wiring bundle. 4. Reconnect the wiring plugs to the electrical housing and push the housing back under the refrigerator. Align the holes in the front lip of the housing with the holes in the refrigerator's base crossbar. 5. Reinstall the wiring clip over the grommets, starting with the smaller grommet at the top and the larger grommet at the bottom. Align the screw hole of the clip with the holes in the electrical housing and the crossbar, and tighten the screw. 6. Ensure the refrigerator door is properly replaced by lifting it onto the bottom right hinge. Align and replace the top right hinge, and tighten the screws. 7. If applicable, replace the ice storage bin and any adjustable door or utility bins. 8. Plug the refrigerator into a grounded 3-prong outlet. 9. Check the leveling of the refrigerator using the adjustable front feet. Use a wrench to turn the leveling feet to raise or lower the sides of the refrigerator as needed. Both leveling feet should be snug against the floor, and the rollers should not touch the floor. 10. Open both doors and check that they close easily. If not, tilt the refrigerator slightly more to the rear by turning the leveling feet to the left. Use a bubble level to ensure the refrigerator is properly leveled. 11. If the doors appear misaligned, follow the instructions in the manual to check the leveling and make adjustments if necessary. Note: These instructions are general and may vary slightly depending on the specific model of the KitchenAid KRSC703HPS refrigerator.
This answer is automatically generatedHow do I know when my filter needs replacing. Old Kitchenaid had a 99 on down to 0. Also, can't close filter door once opened.
how do I know what temperature is actually in the freezer & the refrigerator. (I know how to set it),
I know how to set the refrigerator and freezer temperatures but how do I see what the actual temperatures are inside the refrigerator and freezer?
Do not know how to reset indicator lights on front door of refridgerator Model KRSC703HPS side by side. Need to have written instructions soI can follow them at my own pace.
How to reset water filter indicator lights n front door of my side by side Kitchenaid Refridgerator Model KRSC703HPS
Periodically I find a puddle of water in front of my refrigerator. What is causing this?
I just changed the water filter on my model #KRSC703HPS01. How do I reset the control panel to get rid of the message telling me to order a new water filter?
how do you reinsert drawers after removing to clean. Came out by tilting upward and then out. Not so easy putting them back in. Thanks.
where would I find instructions on how to put the lower freezer drawer supports back in?