Kidde KI-PD manual

Kidde KI-PD
8 · 2
PDF manual
 · 4 pages
English
manualKidde KI-PD
04-08-18
Page 1 of 4 DATA SHEET K85001-0646
Not to be used for installation purposes. Issue 1
KIDDE
®
Catalog Intelligent Initiating Devices

Technology that saves lives

Intelligent Smoke

Detector

KI-PD

Overview

The KI-PD optical smoke detector brings advanced sensing
technology to a practical design that increases efficiency, saves
installation time, cuts costs, and extends life safety and property
protection capabilities. Continuous self-diagnostics ensure reli-
ability over the long-haul, while environmental compensation helps
reduce maintenance costs.
Like all KI Series detectors, the KI-PD is an intelligent device that
gathers analog information from its optical sensor, converting this
data into digital signals. To make an alarm decision, the detector’s
on-board microprocessor measures and analyzes sensor read-
ings and compares this information to historical data. Digital filters
remove signal patterns that are not typical of fires, thus virtually
eliminating unwanted alarms.

Standard Features

Note: Some features described here may not be supported by
all control systems. Check your control panel’s Installation and
Operation Guide for details.
• Next generation optical smoke sensing technology
• Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration
• Uses Existing Wiring
• Automatic Device Mapping
• Up To 250 Total Addresses Per Loop
• Two Levels of Environmental Compensation
• Two Levels of Dirty Detector Warning
• Twenty Pre-Alarm Settings
• Five Sensitivity Settings
• Non-Volatile Memory
• Electronic Addressing
• Identification of Dirty or Defective Detectors
• Automatic Day/Night Sensitivity Adjustment
• Bicolor (Green/Red) Status Led
• Standard, Relay, Fault Isolator, and Audible Mounting Bases
• Sensor Markings Provide Easy Testing Identification
S853
Compatible with VS & VM control systemsCompatible with VS & VM control systems

Manual

View the manual for the Kidde KI-PD here, for free. This manual comes under the category Smoke detectors and has been rated by 2 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Kidde KI-PD or do you need help? Ask your question here

Need help?

Do you have a question about the Kidde KI-PD and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Kidde KI-PD owners to provide you with a good answer.

Number of questions: 0

Kidde KI-PD specifications

Below you will find the product specifications and the manual specifications of the Kidde KI-PD.

General
Brand Kidde
Model KI-PD
Product Smoke detector
Language English
Filetype Usermanual (PDF)
Features
Detector type Carbon monoxide detector
Interconnectable
Wireless connection
Product colour White
Maximum range 12.35 m
Mounting type Surface-mounted
Housing material Plastic
Placement supported Horizontal
Power
Power source AC
Power source AC
Operational conditions
Operating temperature (T-T) 0 - 49 °C
Storage temperature (T-T) -20 - 60 °C
Operating relative humidity (H-H) 0 - 93 %
Operating temperature (T-T) 0 - 49 °C
Storage temperature (T-T) -20 - 60 °C
Operating relative humidity (H-H) 0 - 93 %
Packaging data
Quantity per pack 1 pc(s)
Package type Box
Package type Box
Ports & interfaces
Connectivity technology Wired
Technical details
Detector type Carbon monoxide detector
Interconnectable
Product colour White
Maximum range 12.35 m
Mounting type Surface-mounted
Housing material Plastic
Placement supported Horizontal
Quantity 1
Connectivity technology Wired
Best uses Home,Office
Easy to install
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kidde KI-PD below.

Is your question not listed? Ask your question here

No results