View the manual for the KeySonic KSK-8022BT here, for free. This manual comes under the category keyboards and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the KeySonic KSK-8022BT or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the KeySonic KSK-8022BT.
| Brand | KeySonic |
| Model | KSK-8022BT | 60395 |
| Product | keyboard |
| EAN | 4250078167181 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Device interface | Bluetooth |
| Recommended usage | Universal |
| Keyboard key switch | Membrane |
| Keyboard layout | QWERTZ |
| Keyboard language | German |
| Keyboard form factor | Full-size (100%) |
| Pointing device | No |
| Bluetooth version | 3.0+HS |
| Numeric keypad | Yes |
| Keyboard number of keys | 107 |
| Key travel distance | 2.25 mm |
| Keyboard keys operating life | 5 million characters |
| Country of origin | China |
| Keyboard style | Straight |
| Wrist rest | No |
| Product color | Silver |
| Material | Aluminum |
| Backlight | No |
| Surface coloration | Monochromatic |
| Wireless range | 10 m |
| Battery life (max) | 120 h |
| Power source type | Battery |
| Battery capacity | 350 mAh |
| Rechargeable | Yes |
| USB charging | Yes |
| Keyboard battery type | Built-in battery |
| Charging source | Micro-USB B |
| Mouse included | No |
| Number of products included | 1 pc(s) |
| User guide | Yes |
| Windows operating systems supported | Yes |
| Mac compatibility | Yes |
| Mac operating systems supported | Yes |
| Mobile operating systems supported | Android |
| Keyboard weight | 489 g |
| Keyboard dimensions (WxDxH) | 430 x 430 x 15 mm |
| Package weight | 655 g |
| Package width | 150 mm |
| Package depth | 440 mm |
| Package height | 20 mm |
| Master (outer) case weight | 13700 g |
| Quantity per master (outer) case | 20 pc(s) |
| Master (outer) case width | 455 mm |
| Master (outer) case length | 230 mm |
| Master (outer) case height | 325 mm |
| Harmonized System (HS) code | 84716060 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the KeySonic KSK-8022BT below.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Hold the keyboard upside down and use a can of compressed air to blow away the dirt. The keys can even be cleaned with a damp cloth.
Yes, the KeySonic KSK-8022BT has a Bluetooth interface. This allows the user to connect the keyboard wirelessly to their device, providing convenience and flexibility.
Yes, the KeySonic KSK-8022BT is recommended for universal usage. This means that it can be used with various devices and operating systems, making it versatile for different users.
The KeySonic KSK-8022BT has a membrane keyboard switch. While membrane switches may have a lower tactile feedback compared to mechanical switches, they are known for their quiet operation and durability.
The KeySonic KSK-8022BT has a wireless range of 10 meters. This allows the user to have flexibility and freedom of movement while still maintaining a reliable connection to their device.
The KeySonic KSK-8022BT has 107 keys. This provides the user with a full-sized keyboard layout, including a numeric keypad for efficient data entry.
To switch between devices on the KeySonic KSK-8022BT keyboard, follow these steps: 1. Make sure that the keyboard battery is sufficiently charged. 2. Switch on the device you want to pair, such as a smartphone, laptop, or PC, and activate Bluetooth if necessary. 3. Depending on the channel through which the device should be connected, press and hold the "fn" key along with the corresponding number key (1, 2, or 3) for at least 3 seconds. The connection LED will start flashing white. 4. Go to the Bluetooth menu on your device and select "KSK-8022BT" from the list of available devices. It should be marked with a keyboard symbol. 5. The pairing process is successful when the connection LED stops flashing. 6. Now, select the appropriate layout for your device by pressing the "fn" key along with the corresponding letter key: "A" for macOS, "S" for Windows, or "A" for Android. The default layout is Windows. 7. If you have already connected your device to the KSK-8022BT before and the profile is saved on your device, you can conveniently switch between devices. For example, if your smartphone is paired on channel 1, your tablet on channel 2, and your PC on channel 3. Please note that these steps are based on the KeySonic KSK-8022BT keyboard manual and should help you switch between devices effectively.
The LED indicators on your KeySonic KSK-8022BT keyboard may not be working due to the following reasons: 1. Energy-saving feature: The NUM lock and caps lock indicators are designed to continuously glow while the keyboard is in use. However, after about 10 seconds of inactivity, the LED lights will turn off to conserve energy. This is a normal behavior. 2. Power switch position: Check the position of the power switch located at the rear side of the keyboard. The red mark indicates the "off" position, while the green mark indicates the "on" position. Make sure the switch is in the "on" position for the LED indicators to function. 3. Battery charging: The KSK-8022BT keyboard can be charged via the micro USB port using the provided USB cable. However, please note that the micro USB port is solely for battery charging and does not support data transfer. Ensure that the battery is charged properly using the original accessories to avoid any signal transmission issues. If the LED indicators still do not work after checking these factors, please refer to the troubleshooting section of the KeySonic KSK-8022BT keyboard manual for further assistance.
To turn on/off the KeySonic KSK-8022BT keyboard, follow these steps: 1. Locate the power switch on the rear side of the keyboard. 2. Check the position of the power switch. The red mark indicates the "off" position, while the green mark indicates the "on" position. 3. To turn on the keyboard, slide the power switch to the "on" position (green mark). The keyboard will power up, and the LED indicators may light up briefly. 4. To turn off the keyboard, slide the power switch to the "off" position (red mark). The keyboard will shut down, and the LED indicators will turn off. 5. It is recommended to turn off the keyboard when not in use to conserve battery power. Please note that the power switch is the primary method to turn the KeySonic KSK-8022BT keyboard on/off. Ensure that the power switch is in the correct position for the desired operation.
The micro USB charging port on the KeySonic KSK-8022BT keyboard is solely intended for battery charging and does not support data transfer. Therefore, you cannot use the micro USB port on the keyboard for data transfer. To charge the keyboard, follow these steps: 1. Connect one end of the provided USB cable to the micro USB charging port on the keyboard. 2. Connect the other end of the USB cable to a power source, such as a USB port on your computer, a USB wall charger, or a power bank. 3. The keyboard will start charging, and you can see the charging status through the LED indicators. 4. Once the battery is fully charged, you can disconnect the USB cable from the keyboard and the power source. Remember that the micro USB port is specifically designed for charging purposes and does not support data transfer. If you need to connect the keyboard to a device for data transfer, please use the appropriate wireless connectivity options, such as Bluetooth or the 2.4 GHz connection.
There could be several reasons why your KeySonic KSK-8022BT keyboard is not connecting to your device via Bluetooth. Here are some troubleshooting steps to try: 1. Ensure that the keyboard battery is sufficiently charged. 2. Switch on the device you want to pair, such as a smartphone, laptop, or PC, and activate Bluetooth if necessary. 3. Depending on the channel through which the device should be connected, press and hold the "fn" key along with the corresponding number key (1, 2, or 3) for at least 3 seconds. The connection LED will start flashing white. 4. Go to the Bluetooth menu on your device and select "KSK-8022BT" from the list of available devices. It should be marked with a keyboard symbol. 5. The pairing process is successful when the connection LED stops flashing. 6. Now, select the appropriate layout for your device by pressing the "fn" key along with the corresponding letter key: "A" for macOS, "S" for Windows, or "A" for Android. The default layout is Windows. 7. If you have already connected your device to the KSK-8022BT before and the profile is saved on your device, you can conveniently switch between devices. For example, if your smartphone is paired on channel 1, your tablet on channel 2, and your PC on channel 3. By following these steps, you should be able to troubleshoot and establish a successful Bluetooth connection between your KeySonic KSK-8022BT keyboard and your device.
Yes, the manual of the KeySonic KSK-8022BT is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the KeySonic and is the answer not in the manual?
Question and answer
Number of questions: 0