Kenwood M-817DAB manual

Kenwood M-817DAB
9.8 · 1
PDF manual
 · 20 pages
English
manualKenwood M-817DAB

13

Using the DAB+ Radio _________________________________________________________
Press DAB on the remote control or the Source button on the main device until you see "DAB" in the display.

Setting the DAB+ stations

When commissioning the device, it carries out a station search. The stations found are stored alphabetically in
the station list.
Restarting the automatic station search
Press the MENU button to get the DAB menu.
The display will show "FULL SCAN". Begin the search pressing Enter.
During the search, the display shows the number of stations it has found so far.
If the search finds no stations, the message "NO DAB" will appear for approximately 2 seconds, which then
changes to show "FULL SCAN".
Please check that the aerial is connected correctly or try to find another place for the device for a better
reception.

Manually setting stations

Press the MENU button to bring up the DAB menu.
Press the button TUN+ until "MANUAL" appears in the display.
Confirm by pressing Enter and the display shows the channel currently set with its frequency.
Press the TUN+ or TUN- buttons to choose another station manually.
Press the Enter button to confirm this choice. The signal level will appear in the display and pressing the key
again loads the current ensemble.
Finding a DAB+ station
Find the stations stored alphabetically in the station list as follows:
Press TUN+ or TUN- on the remote control to scroll backwards or forwards in the station list.
When you find the correct station, press Enter on the remote control or wait about 2 seconds to begin
playback.
The message "LOADING" will appear in the display.
If the signal strength for your chosen station is too low for good quality playback, "OFF AIR" will appear in
the display. Please choose another station.
Saving stations in the station memory
There are 20 memory slots where you can store DAB stations for easy retrieval. To use the memory function,
please do the following:
Choose a station to save.
Press the PRG button until the display flashes and suggests a memory location. An empty memory location
will show as "EMPTY" and, if already in use, will show the frequency. You can use a memory location that has
been used before.
Press the TUN+ or TUN- buttons to choose a memory location.
Confirm storage with the Enter button. The display will briefly flash the message "STORED".
The stations can now be selected with the or buttons.

Manual

View the manual for the Kenwood M-817DAB here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Kenwood M-817DAB or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kenwood and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kenwood M-817DAB specifications

Below you will find the product specifications and the manual specifications of the Kenwood M-817DAB.

General
BrandKenwood
ModelM-817DAB
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kenwood M-817DAB below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Kenwood M-817DAB available in English?

Yes, the manual of the Kenwood M-817DAB is available in English .

Is your question not listed? Ask your question here

No results