Kenwood DMX7017DABS manual

Kenwood DMX7017DABS
8 · 4
PDF manual
 · 96 pages
English
manualKenwood DMX7017DABS
Connection/Installation

75English

Connection/Installation

Before Installation

Before installation of this unit, please note the
following precautions.

# WARNINGS

If you connect the ignition wire (red) and
the battery wire (yellow) to the car chassis
(ground), you may cause a short circuit, that
in turn may start a fire. Always connect those
wires to the power source running through
the fuse box.
Do not cut out the fuse from the ignition wire
(red) and the battery wire (yellow). The power
supply must be connected to the wires via
the fuse.

# CAUTION

Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during
and shortly after the use of the unit. Metal part
such as the heat sink and enclosure become
hot.
NOTE
Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
Make sure to ground the unit to a negative 12V
DC power supply.
Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
Do not use your own screws. Use only the
screws provided. If you use the wrong screws,
you could damage the unit.
If the power is not turned ON (“There is an
error in the speaker wiring. Please check the
connections. is displayed), the speaker wire
may have a short-circuit or touched the chassis
of the vehicle and the protection function may
have been activated. Therefore, the speaker
wire should be checked.
If your cars ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the
ignition key. If you connect the ignition wire to
a power source with a constant voltage supply,
such as with battery wires, the battery may be
drained.
If the console has a lid, make sure to install the
unit so that the front panel will not hit the lid
when closing and opening.
If the fuse blows, first make sure the wires
aren’t touching to cause a short circuit, then
replace the old fuse with one with the same
rating.
Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
Connect the speaker wires correctly to the
terminals to which they correspond. The unit
may be damaged or fail to work if you share
the ¤ wires or ground them to any metal part
in the car.
When only two speakers are being connected
to the system, connect the connectors either
to both the front output terminals or to both
the rear output terminals (do not mix front
and rear). For example, if you connect the ¢
connector of the left speaker to a front output
terminal, do not connect the ¤ connector to
a rear output terminal.
After the unit is installed, check whether the
brake lamps, blinkers, wipers, etc. on the car
are working properly.
Mount the unit so that the mounting angle is
30° or less.
This unit has the cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit is
blocked. Blocking these openings will inhibit
the cooling of the internal temperature and
result in malfunction.
Cooling fan

Manual

View the manual for the Kenwood DMX7017DABS here, for free. This manual comes under the category car radios and has been rated by 4 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Kenwood DMX7017DABS or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kenwood and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kenwood DMX7017DABS specifications

Below you will find the product specifications and the manual specifications of the Kenwood DMX7017DABS.

The Kenwood DMX7017DABS is a car radio that offers a range of features for a seamless in-car audio experience. It supports MP3 playback, allowing users to enjoy their favorite music on the go. With Bluetooth connectivity, this car radio enables wireless streaming of audio from compatible devices, providing convenience and eliminating the need for messy cords. For those with Android devices, the Kenwood DMX7017DABS offers support for Android Auto, allowing them to seamlessly integrate their smartphone with the car radio for enhanced functionality. Similarly, Apple CarPlay support is also available for users with Apple devices, providing a seamless connection between their iPhone and the car radio. Featuring a 2 DIN size, the Kenwood DMX7017DABS fits seamlessly in most standard car dashboard configurations. Its on-screen display (OSD) and touchscreen functionality provide intuitive and easy control of the various features and settings. Equipped with an integrated clock, this car radio ensures accurate timekeeping for added convenience. Additionally, it features an ISO connector for easy installation and compatibility with a wide range of car models. With a digital audio broadcasting (DAB) tuner, the Kenwood DMX7017DABS allows users to enjoy high-quality, interference-free digital radio stations. The firmware upgradeable feature ensures that users can keep their car radio up to date with the latest software enhancements and features. The Kenwood DMX7017DABS provides a comprehensive set of features for a enhanced in-car audio experience. With its support for various audio formats, wireless connectivity options, and user-friendly interface, it offers a convenient and reliable solution for any car audio enthusiast.

General
BrandKenwood
ModelDMX7017DABS | DMX7017DABS
Productcar radio
EAN0019048218292
LanguageEnglish
FiletypeUser manual (PDF)
Multimedia
MP3 playbackYes
Audio D/A Converter (DAC)24/32 bit
USB direct playbackYes
Video formats supportedH.264, MKV, MPEG1, MPEG2, MPEG4, WMV
Audio formats supportedAAC, DSD, FLAC, MP3, OGG, WAV, WMA
CD-R playbackNo
CD-RW playbackNo
Image formats supportedBMP, JPG, PNG
Ports & interfaces
BluetoothYes
Android Auto supportYes
Apple CarPlay supportYes
USB ports quantity1
USB portYes
ISO connectorYes
Bluetooth version3.0+HS
Bluetooth profilesA2DP, HFP, PBAP, SSP
Line outputs (RCA)3
USB version2.0
Performance
Product colorBlack
DIN size2 DIN
Integrated clockYes
Firmware upgradeableYes
Output power200 W
Maximum power per channel50 W
Ready for iPodYes
Disc types supportedNo
Audio output channels- channels
Equalizer bands quantity13
High pass filterYes
Low pass filterYes
Display
On Screen Display (OSD)Yes
TouchscreenYes
Built-in displayYes
Display illuminationYes
Display diagonal6.95 "
Display typeLCD
Display resolution800 x 480 pixels
Technical details
Key illumination colorMulti
Customizable wallpaperYes
SlideshowYes
Power requirements14.4V
Radio
DAB tunerYes
Supported radio bandsAM, FM, LW
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Radio Data System (RDS)Yes
Preset stations quantity20
FM radioYes
Operational conditions
Operating temperature (T-T)-10 - 60 °C
Weight & dimensions
Dimensions (WxDxH)182 x 153 x 112 mm
Weight1700 g
Packaging content
Microphone includedYes
Cables includedAudio (3.5mm), DC, USB
GPS Performance
GPS compatibilityYes
GPS antennaYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kenwood DMX7017DABS below.

What is the weight of the Kenwood DMX7017DABS?

The Kenwood DMX7017DABS has a weight of 1700 g.

What is the difference between FM and AM?

FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How can I best clean my car radio?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Kenwood DMX7017DABS?

The screen size of the Kenwood DMX7017DABS is 6.95 ".

What is the screen resolution of the display of the Kenwood DMX7017DABS?

The screen resolution of the Kenwood DMX7017DABS is 800 x 480 pixels.

How can I adjust the audio settings on my Kenwood DMX7017DABS?

To adjust the audio settings, go to the "Audio" menu on the main screen. From there, you can access various options such as EQ (equalizer) settings, tone control, and balance/fader adjustments to customize your audio experience.

How do I pair my phone via Bluetooth to the Kenwood DMX7017DABS?

To pair your phone, go to the "Bluetooth" menu on the main screen. Activate Bluetooth on your phone and search for available devices. Once you see the Kenwood DMX7017DABS listed, select it to establish the Bluetooth connection.

Is it possible to customize the display settings on the Kenwood DMX7017DABS?

Yes, you can customize the display settings. Access the "Display" menu on the main screen to adjust settings such as brightness, color themes, screen savers, and wallpaper. This allows you to personalize the appearance of your car radio.

How do I program radio stations into the presets on the Kenwood DMX7017DABS?

Tune in to the desired radio station and press and hold one of the preset buttons (1-6) on the main screen until you hear a beep. The station will then be saved to the selected preset button for easy access in the future.

Can I connect a rearview camera to the Kenwood DMX7017DABS?

Yes, you can connect a rearview camera to the Kenwood DMX7017DABS. Locate the "Camera" input on the rear of the unit and connect the camera using the appropriate cables. Once connected, you can activate the camera view from the main menu to enhance your parking and reversing experience.

Does the Kenwood DMX7017DABS have MP3 playback?

Yes, the Kenwood DMX7017DABS has MP3 playback. This means that users can play MP3 files on this car radio, which allows for a wider range of audio options compared to radios that do not support MP3 playback.

Is the Kenwood DMX7017DABS Bluetooth enabled?

Yes, the Kenwood DMX7017DABS is Bluetooth enabled. This feature allows users to connect their smartphones or other Bluetooth devices to the car radio, enabling them to make hands-free calls and stream music wirelessly. This adds convenience and safety while driving.

Does the Kenwood DMX7017DABS support Android Auto?

Yes, the Kenwood DMX7017DABS supports Android Auto. This means that Android smartphone users can easily connect their devices to the car radio and access their apps, music, and other features through the touchscreen interface. This enhances the user experience and provides seamless integration between the car radio and their Android devices.

Can the Kenwood DMX7017DABS be upgraded with Apple CarPlay support?

Yes, the Kenwood DMX7017DABS can be upgraded with Apple CarPlay support. This allows iPhone users to connect their devices and access their apps, maps, messages, and more through the car radio's touchscreen interface. This feature provides a high level of integration and convenience for Apple users.

How many USB ports does the Kenwood DMX7017DABS have?

The Kenwood DMX7017DABS has 1 USB port. This allows users to connect external devices, such as smartphones or USB drives, to the car radio for charging or audio playback. While having only one USB port may limit the number of devices that can be connected simultaneously, it is still a convenient feature for users who want to connect their devices to the car radio.

Is the manual of the Kenwood DMX7017DABS available in English?

Yes, the manual of the Kenwood DMX7017DABS is available in English .

Is your question not listed? Ask your question here

No results