Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

9.3.2.15. Configuration - Master/Slave Mode

Multiple AccessPoints can be connected together to one system for the exchange of configuration data (users,
doors, permissions). This compound operation mode is also called „Master/Slave“ mode. Here one of the
AccessPoints if configured as „Master“, all other AccessPoints as „Slaves“.
The „Slaves“ receive the configuration data from the „Master“ AccessPoint. With this operating mode changes of
the configuration have to be made only on one device.
Master/Slave Mode
Determines whether the AccessPoint works as „Master“ or „Slave“. When set to „Slave“, the IP address of the
„Master“ AccessPoint has to be entered.
The address is required for the synchronization. Configuration data is also only accepted from this IP address.
When operating as „Master“, all slaves in the system have to be configured/listed in the „Master“ AccessPoint.
All „Slaves“ are listed with name and IP address.
By pressing „+“ additional slaves can be added, existing profiles can be edited with the pen.
In the profiles a unique name (place of installation) and the IP address for the slaves has to be entered.

9.3.2.16. Configuration - Network cameras

One network camera can be assigned to each Kentix-DoorLock component, to request multiple pictures from
the camera and link these to the corresponding logbook entry. For this purpose any network camera can be
used which is able to deliver pictures via a HTTP command.
Enter a name for the camera (for example the installation place) as well as the camera-specific data (IP
address, user data) and select the camera location.#
The field „HTTP Command“ contains an example for an AXIS camera. Enter the path to the image source file
here without specifying the IP address or communication port beginning with a slash.
Camera location
Description
Inside
The camera is installed in the room, which is entered after the door is opened.#
The recording begins at the moment of the booking. 10 pictures are saved.
Outside
The camera is installed in front of the room.#
3 pictures are pre-bufferd and 7 additional pictures are stored beginning from the moment of the booking.
Page (11-2017, subject to change) kentix.com99

DoorLock

NOTE!
Prerequisite for the "master / slave" operation is the availability of all access points via an existing network.
If necessary, contact the responsible administrator to discuss the requirements for the operation of the
access system.
Please also refer to the point "Communication Ports" earlier in this manual.
NOTE!
The image data are stored on the respective local AccessPoint. In Master-Slave-operation with several
AccessPoints, SD cards must also be used in the slaves depending on the configuration.
The HTTP command for the request of images can be found in the documentation of your network camera.
Note that the image size of 200 kilobytes per image must not be exceeded. This may have to be taken into
account when entering the HTTP command.

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results