Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

9.3.2.13. Configuration - Network

This are the network settings of the AccessPoint. The device is delivered with a default configuration.
Default IP-address: 192.168.100.224
Subnet-mask: 255.255.255.0
Username / password: admin / password
This data can be altered for an operation in the own environment after commissioning.
IPv4-address, subnet mask, gateway
Network configuration of the AccessPoints. DHCP can be optionally activated. In this case always the same IP-
address has to be assigned to the AccessPoint. For this the MAC-address is displayed here. #
Alternatively manual network settings can be entered.
DNS server address 1 / 2 (Domain Name Server Addresses)
Depending on the network configuration (e.g. in combination with a DSL router) this can also be the gateway
address.
Public DNS Servers: 8.8.8.8 or 8.8.8.4

9.3.2.14. Configuration - Communication

E-Mail Data
To send e-mails to the configured users (e.g. to warn about a low battery level), an e-mail server#
(SMTP or ESMTP) has to be configured in the AccessPoint.
When a valid DNS server if configured, the DNS name of the E-Mail server can be used. With ESMTP it is also
possible to work with public e-mail servers which require a user authentication. Also the selection of an
encryption method (STARTTLS / SSL) is possible. The communication port can be changed, if necessary.
Please note, that often e-mail servers also require a valid sender address to forward e-mails.
E-Mail signature
Enter a signature, which will be appended to each e-mail. The signature is limited to a length of 1000 signs.
AlarmManager-Communication
Here the AlarmManager-Communication for a remote arm-/disarm-switching of a Kentix alarm system is
configured.
Enter the IP-address of your AlarmManager and an AlarmManager-user and password.
This user must exist in the configuration of the AlarmManagers and have the authorization „Administrator“.
In the AlarmManager also the communication key of the AccessPoint must be configured.
The changes in the network settings are directly active after saving.
Page (11-2017, subject to change) kentix.com98

DoorLock

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results