Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

9.3. Configuration and operation modes

The access system Kentix DoorLock can be operated in an online- and offline-mode.
In the offline-mode the complete programming is done at each DoorLock-device separately.#
Time profiles cannot be configured in this mode. The offline-mode is suitable for small installations with only a
few doors and up to 10 users.
In the online-mode the programming of DoorLock-devices is done via the web-interface of the AccessPoints.
Here only the master card set (Servicekey) has to be programmed directly at the device.

9.3.1. DoorLock-device without AccessPoint (offline-mode)

The programming basically consists of two steps:#
the initial setup and the programming of the RFID cards for the users.

9.3.1.1. Initial setup - insert / activate batteries

Online knob and door lever and cabinet lock are battery operating devices. For the commissioning the batteries
must be inserted or activated first.
The Online knob is delivered in opened state with the a loosely mounted knob cover.#
The cover can be easily pulled down from the knob. One of the two batteries is blocked by a plastic lock. This
lock has to be pulled out to activate the knob. The knob then signalizes the activation by multiple short tones.
At the Online door lever the required battery is not installed, but delivered with the additional equipment.#
To insert the battery, the allen screw on the electronic side must be screwed into the lever using the enclosed
Allen key. The front part can then simply be removed.#
Insert the battery with the negative pole first into the front part. Then put it back onto the lever and fasten it.#
The activation is then signalized by a short tone.
At the Online cabinet lock the battery is also delivered separately. It has to be inserted into the battery
compartment which is then pushed into the lock from below.
For the opening a special key is required which has to be purchased separately.!
Page (11-2017, subject to change) kentix.com87

DoorLock

NOTE!
Each action is confirmed by visual and acoustic notifications.

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results