Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

9.1.6. Master card set

9.1.7. AccessPoint

9.1.8. Accessories

To replace the batteries at an Online knob or cabinet lock a special battery replacement tool is required. The
replacement tool for an Online knob is already included in every master card. For the cabinet locks, the tool has
to be purchased separately.
For the replacement of the battery in a door lever a matching Allen key is required. This is always supplied
together with the door lever.
When fully discharged, it is no longer possible to open a Online knob for a battery replacement. For this purpose
a „low power adapter“ is available to make single access bookings. A description of this emergency opening can
be found later in this manual.
With the master cart set the DoorLock-devices are prepared for
the operation.#
Only one master card set is required per system / installation,
which consists of these 4 cards:
System card
Servicekey card
Battery change card
Dismantling card
The AccessPoint is the central component of the access solution.
Online-knobs, door levers, wall readers and cabinet locks are
connected wireless to this device. The AccessPoint is then
integrated into the network via a PoE-enabled Switch.
Now the basic settings like IP-addresses, doors and user data
can be done via the web-interface.
A description of the configuration can be found later in this
manual.
Page (11-2017, subject to change) kentix.com69

DoorLock

NOTE!
Always keep these cards at a safe place. Without them a configuration of the components is no longer
possible.#
When the Servicekey card (=programming card) is lost, it is possible to order a replacement card with the help
of the number printed on the System card.
Battery change card and dismantling card are only required at an Online knob, not for the other DoorLock-
devices.

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results