Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

8.8. Kentix IO-Modules

The AlarmManager-PRO can be extended by additional digital Inputs and Outputs via special Expansion

modules. For this 2 external modules (KIO7052 with 8 digital Inputs / Outputs and KIO7053 with 16 digital

Inputs) are available.

Both modules are configured via a Web browser and are queried by the AlarmManager over the network.

Commissioning and Configuration

Depending on the module type it can be powered via PoE or with an external power supply. Using a power

supply it is necessary to regard the information in the data sheet, or only to use a power supply delivered by

Kentix. Information for the wiring of the In- and Outputs can also be found in the data sheet.

No
Step

Comment

1
Connect the network port E1 to a network switch with PoE support. Connect
your PC to this switch respectively establish a network connection.
If you use a switch without PoE establish power
supply via the connectors (R)+Vs and (B)-GND.
Use the supplied power adapter-cable.
2
Open the Web-Interface of the module via the default IP 192.168.255.1 and
change the IP-settings in „Network Settings“ to your required settings.
Default username and password: Admin/Admin
In the section „Web HMI“ the Inputs and
Outputs of the module can be monitored for
test purposes.
3
Start the Kentix ControlCenter and open the configuration of the I/O-module
via „Settings“ -> „Advanced...“ -> „External Alarms“
Select the module type and set the configured
IP-address.
4
Proceed with the setup for the wired external Inputs:
Enter a name for the alarming and choose alarm assignment and the alarm
logic. Eventually enter another alarm delay (default 1 sec.). Also select an
alarm zone for every used input.
In the module KIO7052 for each alarming state
one of the 8 Outputs is switched. Find the
assignment of the Outputs in the data sheet of
the module.
5
Save the configuration. After this the settings are directly active.
For testing purposes the state of the alarm
inputs can be monitored in the table
„MultiSensor Monitoring“.
Page (11-2017, subject to change) kentix.com64

Terminal assignment KIO7052

Terminal assignment KIO7053

KeyPad-Touch & Accessories

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results