Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

8.7. Kentix Alarm sirene (KFLASH1)

The Kentix Alarm sirene can be used for an acoustical and optical signalization in case of an alarm.#
It is suitable for an indoor and outdoor installation (protection class IP65).
The Alarm sirene is equipped with a 10 meter patch cable and a RJ45-connector and can be directly connected
to the system jacks of an AlarmManager or to all MultiSensor-RF/-LAN/-LAN-RF using an additional adapter
(RJ45-T-Adapter). The required adapters are included with the Alarm sirene.
Figure 1: Alarm sirene at AlarmManager
Simply plug in the Alarm sirene into one of the system jacks.
Power supply and alarm signalization is done via the AlarmManager.
Figure 2: Alarm sirene at MultiSensor
Plug in the Alarm sirene into the RJ45 T-Adapter and connect the MultiSensor to the socket next to it using a
patch cable. The power supply is done via a Power-Adapter (KIO2), which is connected to the opposite side of
the T-Adapter.
When also the alarm input of the connected MultiSensor shall be used (e.g. by connecting a leakage sensor), a
KIO2 Power-Adapter can be used instead of the KIO1. In this case all connection cables have to be patch
cables.
Page (11-2017, subject to change) kentix.com62

KeyPad-Touch & Accessories

AlarmManager-BASIC/PRO
KENTIX System jack
Alarm sirene
MultiSensor-RF/-LAN/-LAN-RF/-RACK
KENTIX System jack
Alarm sirene
KIO1 or KIO2#
Power-Adapter
T

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results